- Paul SextonParticipantFebruary 15, 2018 at 4:51 amPost count: 87
Damn JJ! Late night, and on Valentine’s Day. Sure looking like a show truck to me!!Pat KKeymasterFebruary 15, 2018 at 7:36 amPost count: 1508
We will build it if it comes.Scott SainParticipantFebruary 15, 2018 at 11:09 amPost count: 287
Are the numbers in the engine bay serial numbers?Vwsarent4hippiesParticipantFebruary 15, 2018 at 12:48 pmPost count: 111Juan 59 DDWTParticipantFebruary 15, 2018 at 5:00 pmPost count: 298
John / Franz,.. What is the correct color code for the intake 36hp ?.
Amazing Job KCW,.. Congrat!!66beaterParticipantFebruary 15, 2018 at 6:26 pmPost count: 64
That yellow is looking really good!
us after hours hackshows just trying to “keep up with the Jones’s”John JonesKeymasterFebruary 15, 2018 at 8:01 pmPost count: 7076
Peet has been working on your engine… He decided to pull your heads and replace those crunchy pushrod seals…. The valves were all adjusted wrong on this thing too… But he got it all dialed in now. I sanded all darned day today, didn’t even do my paper work or pay my guys!!!! I’l have to do that first thing in the morning…. 😎 opps… I got the bulk of sanded early…. and had hopes I would be in sealer around 5 or 6… well… that time came and went…. So I will mask and seal it in the morning… assuming I don’t fuck that up, I will do that white quickly afterwards… Yellow on Saturday… Clean shop Saturday night!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!68tintopParticipantFebruary 15, 2018 at 9:47 pmPost count: 741
Damm this truck is going to be sweet. I like the color so crispy clean.Paul SextonParticipantFebruary 16, 2018 at 4:09 amPost count: 87
Color is excellent JJ. Appreciate y’all’s patience with a non stock layout too. What’re those numbers on the engine case ?FranzKeymasterFebruary 16, 2018 at 7:56 amPost count: 3786
Transmission gear ratios. Should cruise pretty good with the 4.12 in it.John JonesKeymasterFebruary 16, 2018 at 11:36 amPost count: 7076
I think that is the same gearing I probably have… I cruise 55 all day long… 😎 Perfect.
Ok.. all JJ’s paperwork and thursday duties are done.. I am going to finish prepping this S/C and get it in the booth!!!!! 😎John JonesKeymasterFebruary 16, 2018 at 6:55 pmPost count: 7076
sealer is on and bitchen… Yellow is about to happen…. 😎FranzKeymasterFebruary 16, 2018 at 7:02 pmPost count: 3786
JJ is in the booth spraying yellow.
I’ve been building front suspension all day. It had good tight original king and link pins. New seals through out. Fully cleaned original hardware and zerks.
All the correct seals and caps.
Peet stacked the engine today. New alternator, coil, fuel pump, main seal and a distributor rebuild.
Wolfsburg West parts arrived. I got everything. Shocks bearings brakes german master hoses tubes cables wire harness cables gas tank mirrors muffler rubber hardware latches rivets etc.
Everything for full bumpers.
- You must be logged in to reply to this topic.