-
I cleaned the all cable tubes really well with a wire/cloth and brake clean, so that they will function smooth as butter. Also, gathered up some missing hardware for clean up tomorrow.
Gathered up seats this morning. Stripped then down for blasting. Few spring repairs along the way.
Dug seat side cover out of the KCW stash.
Your driver side seat back is incorrect. No lever or lug for the 66-67 side latch. Dug one out of my stash.
WE NEED TO FIND a PASS side mech (latch, lever, & spring) . Can any one out there HELP???
Ohhh yeeeah!!!
We will build it if it comes.
Tore down a few other bits. Pedal assy, wiper mech, and the steering column.
You were missing all of your inspection covers. KCW stash provides again.
Made it out to the booth and blasted everything. Paint tomorrow.
We will build it if it comes.
Sand blasted and coated a bunch of original Kamax hardware. It’s going to be an epic assembly day tomorrow, I’m 100% prepared. Solid axle boots, FAG bearings.
Our drag racing buddies, John Redding and Eric Madson have taught us to chamfer, round, and polish all of hard edges on the spade end of the axle. Thid is where they always break. Empi racing axles ready to go.
The Bentley device book says to round the corners and edges of the fulcrum plates to prevent chipping. The plates with lines across the face are new over-sized. I will try to fit them first and measure clearance with a feeler gauge.
Eddie Radillo/Painter’s Grinding modified super diff with large oil holes and grooves for the side gears.
Awesome watching… 😎👍🏻👍🏻👍🏻 This is what the website does best👍🏻👍🏻👍🏻👍🏻👍🏻
Pats in here hanging parts at 5am😎😎😎 Franz is just getting done at midnight 😎😎😎
Honesty can potentially harm your relationship 😢
Pictures don’t do it justice it is SO PRETTY 🤩Kill em with Kindness 😎
Don’t worry, Be Happy 🤙🏻
Volkswagens Make People Smile!✌🏻Pass seat base has been previously “repaired”
Cleaned up and weld. Much better.
WW color charts are awesome!
https://www.wolfsburgwest.com/colors/66l360.htm
Epoxy sealer laid down. L43, Grey Black paint up next!
We will build it if it comes.
Bolted on fender and deck lid while the sealer was drying.
Grey Black, L43, on all of the seat frames and side covers, steering column and turn signal also.
We will build it if it comes.
- You must be logged in to reply to this topic.