Tom’s Sea Blue Cal look Sunroof 66

[russ]

#67504

thats a pretty rough start but it’s in good hands

fair bit of rust from when you first see it all together

[John Jones]

#67514

yeah… I was thinking “Lucky me” while I was blasting holes in all the rusty spots… 😎

These Gerson heater channels are so awesome…. !!! 😎  heavy!!!  correct!!!!  Love em!

I got lots of work ahead of me Tom…  But I will widdle away at it!!! 😎

Blow me!

[Audrey Jones]

#67516

[Audrey Jones]

#67519

[John Jones]

#67522

She fits like a glove!!!! I think I will pull it out and spray some primer up in them pillars!!

 

Blow me!

[John Jones]

#67563

I sprayed a few coats of etch primer up in the pillars where it will be hidden after I put the heater channel in.  I also need to see about the defrost tubes that go from the heater channel up the A pillars to the defrost.. I want to get that flex tube on now while I can get to ti…

It’s rusty everywhere … 😎

Blow me!

[John Jones]

#67571

Solved!👍🏻👍🏻👍🏻

 

Blow me!

[John Jones]

#67581

I can pick the channel up with the hose👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻   And I put some seam sealer around it also👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

Blow me!

[russ]

#67582

coming together nicely, every bit of rust thats cut out and new metal in is a step in the right direction

[Sunny66Sunroof]

#67584

Yes, Awesome!….looking Great!…That heater channel DOES fit great!  Thanks for the etch up in the armpits…lol…it will be away from the weather, but we do have salt air down here that u can’t get away from….even 30 miles inland…

Toto, I've a feeling we're not in Kansas anymore!

[John Jones]

#67589

This was one of them days where I stared at that corner for awhile while deciding how to attack it…

I had a sorta fit panel I trimmed up and welded in the missing parts😁😁😁😁😁😁😁😁

Then I drilled some holes in prep for some plug welds, and sprayed some more primer in the arm pits😁😁😁😁

next is weld the lower nut plate skin that’s all cracked… and install that heater channel👍🏻👍🏻👍🏻👍🏻👍🏻

 

Blow me!

[Pat K]

#67590

We will build it if it comes.

[John Jones]

#67673

Well Tom…. It’s time to get to work on your rig!!!!!!   I’m gonna get that heater channel in and set today!!!  😎

Pics later!!!   Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 8-)Do work JONES!!!!!!!!!!!!!!!!!! 😎 😎 😎

Blow me!

[Willy]

#67681

Can already tell that the attention to detail on this one is going to be top notch. Clean and beautiful Cal Look!

[Sunny66Sunroof]

#67687

Go, Go! Go Johnny GO GO!!  (I think Chuck B had a song….)

I’m excited as hell to have ya working the rust out of ‘er!

Toto, I've a feeling we're not in Kansas anymore!

[Author]

Posts