Home Forums KCW Current Projects Scott’s ‘61 Shorty

Viewing 0 posts
Viewing 20 posts - 21 through 40 (of 47 total)
  • Author
    Posts
  • JeremyJeremy
    Participant
    Post count: 109

    Not everyone’s taste but I like these little shorty’s.

    Building a shorty single cab in my garage right now. Not quite as short. Only 12″.

    Going to like following this build.

    AvatarAudrey Jones
    Moderator
    Post count: 388
    AvatarPat K
    Moderator
    Post count: 1876

    Hmmmmmm…..match the trucks length to Scott’s height?

    We will build it if it comes.

    RSP3RSP3
    Participant
    Post count: 217

    This is so funny to watch!

    AvatarAudrey Jones
    Moderator
    Post count: 388

    C8CE1E72-2112-4DD1-B35B-2632923F143B
    it looks like a bomb went off right in the middle of the Shorty! 😅
    AB64420B-D7D3-4905-A29B-AFD78A52E25653E0F033-DE91-42EA-BC61-BE8D675A6367

    RSP3RSP3
    Participant
    Post count: 217

    Still at it and getting shit done! Cab is being blasted now!
    DEF4C73A-52C6-44CF-B6BF-49313C19E64D

    Avataralykat
    Participant
    Post count: 602

    Just flying through it Scott !  Excellent progress.  Think you will still be in town Thursday ?

    John JonesJohn Jones
    Moderator
    Post count: 7594

    Gonna try and have this cab knocked out today!!!  Get everything abrasively cleaned up!

    AvatarVwfool
    Participant
    Post count: 366

    I have to be home no later than Thursday night. Gotta go back to work

    WillyWilly
    Moderator
    Post count: 1336

    Damn! Haul ass

    Punk kid

    John JonesJohn Jones
    Moderator
    Post count: 7594

    No one has really been keeping up with the pics on this project..  I have been blasting like crazy.. what a rusty piece of shit..  With all due respect, Scoot brought me another huge piece of shit..   But  no problem… I can weld… Pat can weld, and I know where to buy metal… so shit… I bet we make something out of this….

    Scott wants the Nicest Shorty on Earth..  The NSE….  😎  He is well on his way….8-)

    DSCF9924

    AvatarBBWB
    Participant
    Post count: 991

    This is going to be nice. I’d love to lend a hand on it soon.

    I'm at the age where "fuck off", "fuck you", and "fuck it" answer most questions.

    AvatarVwfool
    Participant
    Post count: 366

    Big hefty THANK YOU to John, Corporate, Zach, Audrey, Pat, Franz, and Cole for  their help when I asked a dumb question or needed help moving the pieces of my truck.

    You all made my time there great.   Even the dogs Nico, Sadie and Dipshit. 🤣

    Unfortunately I had to leave a couple days earlier than I had originally planned due to some unexpected  family circumstances that arose.

    Thank you KCW family and crew and especially John for providing me the opportunity to learn just a few of your tricks and our 20+ year friendship.

    John JonesJohn Jones
    Moderator
    Post count: 7594

    After I fretted over my sandrail engine…  (I think it has an ODD tick in it but trying to ignore)   I did some work on this…

    I need to get it on the frame table… I want to make it straight, and get it to one piece again..    So… 1st To get the rear on the table, mounted, I need rear frame bumper mount holes, Frame horns, and a narrowed torsion housing,    2nd, to get the front on, I need to finish the front of the frame jig to mount a later bus style beam to the table securely. and front bumper mount holes will get the front securely to the table…  Then,  can push the two peices together or apart, all the while, keeping things square….   Once it is one piece again, and mounted to the table, I can also use the table to push or pull if things are out of square…

    So I fixed the bumper mount holes and got that hinge off before I went out and tried the sand rail again….. 😎

    Kinda handy working on this upside down… 😎 😎 😎

    DSCF9937DSCF9938DSCF9940DSCF9939DSCF9941

    Going to narrow the housing now… 😎

    AvatarVwfool
    Participant
    Post count: 366

    Looking great!  The torsion bars and spring plates are up on that shelf in the box

    John JonesJohn Jones
    Moderator
    Post count: 7594

    Did some more disecting yesterday, then dusted off the bed again…  top bottom inside and out… it’s clean clean clean like lolli pop! 😎  I am going to disect the end casting this morning and get them slid in and mount bolted on, or I should say mounts… then bed up on the big table!!!!   I got my chain hoist back out to help me with all this lifting…  (although my back is hurting pretty bad.. nerve pain down my left leg, foot tingling pain… maybe I should chill out some…  or just stretch through it…)

    I wish we could raise the roof and keep the glass stock…. hummmmmmmmmmmmm

    AvatarVwfool
    Participant
    Post count: 366

    Don’t wreck yourself working on my crap

    John JonesJohn Jones
    Moderator
    Post count: 7594

    Yesterday, My back was hurting like no other, my knee and ankle…. I just took the day off yesterday…. Did my DAMNED check book register and laid down.. 8-(   A good nights sleep and some rest and I usually feel better… and I do… So today I am going to dissect them torsion end castings and see about dropping the bed down on the table…. 😎  Tuesday I cleaned up the bed more and blasted it for the final time!!  it’s clean now.

    I couldn’t believe the Vin tag screws were still there, but no Vin tag… 8-(

    DSCF9952DSCF9953DSCF9954DSCF9955

    DSCF9956DSCF9957DSCF9958DSCF9959

     

    AvatarVwfool
    Participant
    Post count: 366

    I forgot how it feels to be a customer watching a dream become a reality, even if it’s a ridiculous short truck. 😂

    Avatarruss
    Participant
    Post count: 94

    it’s going to pretty damn awesome when done

Viewing 20 posts - 21 through 40 (of 47 total)
  • You must be logged in to reply to this topic.