Home › Forums › KCW Current Projects › Parkway projects
-
AuthorPosts
-
Found spring plates a brand spanking new clutch and disc also some engine bay seals!! And Napa has new shocks!
your fronts were soooooo toooo short! It must have roads like shit.. and your rears, shot and dented like my race shocks!😎😎😎
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔All these 66’s around here!!!
I wonder if the stock spring plate angle is in the book??? 🤔🤔🤔🤔🤔. I’m gonna look! I have the official manuals for all the cars I work on 😉😉😉. You know.. like a shop. But all I probably need to do is look on samba 👀👍🏻
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔Yes it is! 13 degrees preload
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔Had to fix a seal on the right rear caliper yesterday..
This was built 3 years ago!! Still looking sharp! You could buy this Baja it’s for sale!
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔Sara.. you and the boys would be very safe riding around in that rig! 😉😉😉😉😘. Dan, you like Baja’s???
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔Your car is seriously nice! I haven’t seen any rust on your car at all!
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔I don’t like how much spline you give up with this set up. Looking around this week, I have found about 4 sets of adj spring plates we have removed from Cars!
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔13 degrees heavy 👍🏻👍🏻👍🏻
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔And left side heavy 13 degrees
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔I do like being safe but I’m less the Baja style type.
Rear end all back from apart! Some fresh hardware where needed, fresh original spring plates set to 13 degrees. Cleaned up engine bay degrease and wipe out. Cut out the old engine bay seals. And used some duck bill pliers to clean up the seal channel.. it had seen better days. Then arm wrestled new engine bay seals in! I cleaned up the finger pokers someone left behind on the firewall and noticed your throw out bearing clips had been rubbing on the pressure plate and were just about worn through!! I imagine from a clutch being adjusted too tight?? I wonder if the clutch tube is broke in the pan????? Probable🤫🤫🤫🤫🤫🤫🤫
Tomorrow I will get some shocks installed, heat risers done in the exhaust, new clutch and disc.. engine in!!😎😎😎😎😎😎😎😎
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔Maybe I should talk Sarah into the Baja!!!
Maybe I should talk Sarah into the Baja!!!
it’s a pretty sick Baja!! I wish he would just keep it! He loves it!! It’s a show Baja! Never seen dirt🤫🤫🤫. Needs a bigger motor and some different wheels and tires.,,, maybe some Douglas wheels and some Yok’s!!!!
All work and no play makes JJ a dull boy🤣
Keeping a lid on it😎
Attitude is everything 🤔That baja is awsome!
-
AuthorPosts
- You must be logged in to reply to this topic.