-
Got the heater boxes and exhaust painted in some high temp!
noticed a crack in the fan. Good thing I blasted it.. just cleaning it I may have missed that🤫🤫🤫🤫.
Been a wild ride, but it got me here 😎
Good day on the 1600…👍🏻
Stacking is putting all the components on the long block that turns it into an engine!!👍🏻👍🏻👍🏻
Distributer looked ok. China with a pertronix in it. New oring and stabbed it! New fuel pump just for good measure! . I also got rid of the crappy oil fill and made you a “double barrel” set up! I’ll put a vent I the valve cover also! This is how we have been doing all of them now for years! While putting your intakes on…. I noticed one was aftermarket and not like the other.. so I had to go back out in the trailer and find the intake I wanted.. surfaced the intake surface and blasted and painted an OG one for you! Little dry time and installed. I’m gonna get your heat risers working right and connected to the exhaust!!!!👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 Your generator looks recently new.. so cleaned it up for reinstall. With a new clamp.
I’ll have the first run done today!! Start getting the chrome firewall out and what not!!👍🏻👍🏻
Been a wild ride, but it got me here 😎
She sings like a singer sewing machine👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 First break in done ✅
Been a wild ride, but it got me here 😎
Back on the lift!!😁😁. Good place to be!
trans is dirty.. mounts look slightly soft… but, with your setup.. not likely to break anything. It’s not solid mounted but almost😁
Been a wild ride, but it got me here 😎
- You must be logged in to reply to this topic.