- WillyModeratorNovember 27, 2017 at 6:00 pmPost count: 1212John JonesKeymasterNovember 27, 2017 at 7:59 pmPost count: 7114
I had to go get some stuff out of the trailer today… Thanks for putting your stuff RIGHT IN THE WALKWAY!!!!! It’s hard being 22.. 😳 😳RustabusParticipantNovember 27, 2017 at 9:31 pmPost count: 2002
Yer Awesome Will!!!! I’ve been dropping the ball on being a KCW pain in the ass!!!!! Thanks for pulling up the slack!!!!!!!!!! 😆 😆 😆 😆 😆RustabusParticipantNovember 27, 2017 at 9:34 pmPost count: 2002WillyModeratorNovember 30, 2017 at 12:42 pmPost count: 1212
I guess I forgot to post up how I even messed up that puck up in the first place… We noticed the other night that the seam between the bottom of the gutter and the side panel was abnormally wide next to the cargo doors. Looking at the backside of the gutter from inside the bus you could see that it started out pretty tight and then slowly got wider. Couldn’t tell what caused it but it looks like something had pressed the roof down and popped a few spot welds and bowed the whole side out.
To correct it I welded JJ’s one wheel pucks to the cargo floor and then chained it to the portapower. Hooked it into the rain gutter on the inside and it pulled the whole thing down. It was crazy to watch because as it pinched the two panels together it also smoothed out the roof and tightened up and sucked in the side panel. You could let it out and suck it back in back and forth with the portapower, pretty fun stuff.
Got it back where it was supposed to be and welded all the cracked and broken welds to hold it all back together. Looks right now and it tightened up all the door gaps! I’m pretty excited about it and think its a little bit of a graduation to a higher skill level. Maybe even a level 4! ?GlennmossModeratorNovember 30, 2017 at 3:33 pmPost count: 225
It’s really coming together! Definitely a more respectable build than his last shiny bus. Will calls me to tell me that I’m going to have to head out to KCW to be put to work on this project as soon as I get home… missed you too broJohn JonesKeymasterDecember 15, 2017 at 8:22 amPost count: 7114
when are you getting here punk? 😉 😉 😉WillyModeratorDecember 16, 2017 at 9:30 amPost count: 1212
THIS AFTERNOON BRAH! ????
Getting to GJ by rail this time. It’s been a while since I’ve rode the train anywhere, and I forgot how pretty and relaxing it can be. Gives me some time to do some much needed career searching stuff. Took this picture this morning. The station is definitely sporting some holiday spirit. ?John JonesKeymasterDecember 17, 2017 at 8:38 amPost count: 7114
will is here and all up in my shit…. 🙄BBWBParticipantDecember 17, 2017 at 10:14 amPost count: 877
You gotta’ be loving this Jones! Injecting all this good karma into the young kids. Good for the soul if you ask me.
I'm at the age where "fuck off", "fuck you", and "fuck it" answer most questions.John JonesKeymasterDecember 18, 2017 at 7:36 amPost count: 7114
I enjoy helping the young guns…. I do enjoy seeing them progress and get better and more confident.. Working on your own stuff, and getting good at it.. is what leads to you making a living doing this.. and do see them getting better.. Willy gets better and better each time, and more independant. Which is what I strive to teach people.. How to fix shit and make their own decisions instead of always asking me.. 😉 😉 😉 Make it right, so what makes sence, and be logical… you’ll see, it’s not that hard. 😉
COLE took a GAS shower last night changing his fuel line on his DD…. boy did he stink! 😀WillyModeratorDecember 18, 2017 at 3:08 pmPost count: 1212
I’m really enjoying being able to figure out how to get things right on my own, and spending a lot less time being frustrated. Still, I need and really appreciate Jone’s help on the level 5 stuff. We worked the rear passenger side panel together… its tough to get soft stuff like that smooth and not oil canning. Like the nose that Rusty helped me with.
We’re getting close to having all the welding done on the bus and ready to start spreading mud. That’ll be a good day…. Spent most of yesterday filling misc holes that were drilled everywhere, making patches, and finishing spots that were half done. Sanded the long panel and found some more spots to work.John JonesKeymasterDecember 18, 2017 at 8:42 pmPost count: 7114
He’s getting there.. I am trying to get him to finish all his welding and grinding.. 😀 he’s moved inside.. there is hope!
He’s so damn happy…. I dunno whats wrong with him.. but I got an idea… 😯 😯 😯WillyModeratorDecember 19, 2017 at 10:36 pmPost count: 1212
- You must be logged in to reply to this topic.