- John JonesKeymasterSeptember 22, 2017 at 8:43 amPost count: 6508
the wisconsin state bird 😉 😉 😉 😉 😉 😉 😉 😉 😉 😉 😉 😉
toms favorite beer logo?
a star for Texas?FranzKeymasterSeptember 22, 2017 at 8:55 amPost count: 3514
Cool! Thanks Matt. 1/4″ stainless?
I was thinking something more like this. You can probably design something way more sick. The outside dimensions can be different too.FranzKeymasterSeptember 22, 2017 at 8:58 amPost count: 3514JdawgParticipantSeptember 22, 2017 at 8:58 amPost count: 448
I like the triangles but it needs the “KCW” between the beams.FranzKeymasterSeptember 22, 2017 at 9:05 amPost count: 3514
I’ve got all kinds of good ideas if nobody else does. 😛 😛
Ima have to hit Creig up for some advise too.FranzKeymasterSeptember 22, 2017 at 9:13 amPost count: 3514
I always did like the ronal teddybear wheels…unkParticipantSeptember 22, 2017 at 1:06 pmPost count: 385Matt FaulknerParticipantSeptember 22, 2017 at 4:45 pmPost count: 49FranzKeymasterSeptember 23, 2017 at 7:08 amPost count: 3514
That looks sweet Matt. Can you put kcw on one of them somewhere somehow?BBWBParticipantSeptember 23, 2017 at 7:38 amPost count: 822
KCW between the torsion tubes would look right to me.
I'm at the age where "fuck off", "fuck you", and "fuck it" answer most questions.Matt FaulknerParticipantSeptember 23, 2017 at 9:08 amPost count: 49
Yep I can do that no problem. I think the KCW would look good between the tubes as well, so we’ll go with that.Matt FaulknerParticipantSeptember 23, 2017 at 9:25 amPost count: 49
Just thinking. If we lasercut the logo, it’ll have to be the KCW with the Beetle silhouette over it, as the old English logo is too intricate to cut.
I could laser etch the old English logo after the parts are cut though if that interests y’all. You guys can pick…just laying out some options. 🙂unkParticipantSeptember 23, 2017 at 11:30 amPost count: 385
Laser etch sample…
id choose the kcw and beetle. Rather than the roman letters
actually I would water jet the kcw beetle logo between the holes where the beam cross members are instead of just removing the material between the beam cross members.
John JonesKeymasterSeptember 24, 2017 at 8:34 amPost count: 6508
- This reply was modified 2 years ago by unk.
Maybe instead of cutting everything out… we just etch it? Be stronger wouldn’t it?
I am gonna continue on today… Get some progress going again!John JonesKeymasterSeptember 24, 2017 at 4:51 pmPost count: 6508
I stared at those f’ed up semi pockets today…. I think i am just gonna have to cut em out and hammer and work em and weld em back in…. 😥 😥 😥 More stuff taken care of today… I think I am ready to move inside… 🙂John JonesKeymasterSeptember 25, 2017 at 7:05 amPost count: 6508
Gonna get started early on this rig today! 😉 I was thinking about colors again yesterday…. With the Standard 3 spoke wheel and all… I guess Dove Blue would work. But I think I will base clear this one.. It will make it much shiney ier and a little more deluxe.. ofcourse. I gotta cut and buff it too… 😉 😉 😉 Those wheels are pretty commercial looking too.. I wonder if we could add some paint detail in the circles or something. L31 in the holes?
I think I wanna deliver this one to wisconsin… and take some cabin time afterwards.. 😉 😉
- You must be logged in to reply to this topic.