-
AuthorPosts
-
Thanks pat for fixing that seal and adjusting e- brake. My wiper motor sucks. U have to spin the armatur by hand to get them to work. A refurbished motor that works would be sweet. The only other thing that was weird is that when u swivel around in the front seat 2 many times it turns the nut on the button side so it unthreads its self and becomes loose. Not sure if u can put a weld somewhere so it does get loosen up with a few spins of the swivel seat. 4 bolts that mount the base takes the seat out and u can tighten up and weld. Thank you guys for fixing my shitt😜😬🤪
Nice Pat!!!! 😎
Been a wild ride, but it got me here 😎
Thanks pat for fixing that seal and adjusting e- brake. My wiper motor sucks. U have to spin the armatur by hand to get them to work. A refurbished motor that works would be sweet. The only other thing that was weird is that when u swivel around in the front seat 2 many times it turns the nut on the button side so it unthreads its self and becomes loose. Not sure if u can put a weld somewhere so it does get loosen up with a few spins of the swivel seat. 4 bolts that mount the base takes the seat out and u can tighten up and weld. Thank you guys for fixing my shitt
Maybe just safety wire it ?
Franz pulled a 12v Volvo wiper motor out of the stash for you.
I opened it up, bench tested it, and got it installed. I’ll look at you swivel seat tonight.
We will build it if it comes.
Thanks pat. Wipers are going to be a necessity in my neck of the woods. If u could take a look at the seat that would be awesome. I also liked that piece of rubber over the back hatch insulation. Under the back bed cushion. If u got time. Just gotta find a ride down to pick up my shitt 😜🤪
Drilled a couple of holes in a chunk of steel and bolted it down over the pivot bolt on your swivel seat so it can’t back out now.
Set alignment, and adjusted drag link so your steering wheel is straight.
Noticed your steering dampener mount was about to snap off. Welded that back solid and shot a touch of rattle can for rust prevention. Pedal pan back on.
Hardware store was out of the rubber mat for the rear parcel tray. I’ll get some ordered.
Franz and I both took it for test drive. You are set to go Jessie!!!
We will build it if it comes.
Ready for another road trip!!!!
Been a wild ride, but it got me here 😎
Thanks pat for the weld up. Looking good. Hopefully that fix will fix the swivel. I was wondering if the bolt on the top side will still come loose. Hopefully next week I be able to pick up my bus. Any body want to buy my bay winder. Hopefully I can sell it in the months to come. Maybe I post it on scamba the barndoor of a Bay windows is for sale. Any bidders. 😬😜🤪
Hauls ass now. Interstate speed all day.
Gretchen got a fresh batch of shirts friday.. 😎 Can’t wait to road trip with ya somewhere!
Been a wild ride, but it got me here 😎
Gretchen got a fresh batch of shirts friday.. 😎 Can’t wait to road trip with ya somewhere!
Any OG style KCW shirts in that mix?
I would be up for a couple of new ones. 👍
Tim
I am going to be in town tomorrow around 10 am. See u guys then😬😜🤪
Gretchen got a fresh batch of shirts friday.. 😎 Can’t wait to road trip with ya somewhere!
Any OG style KCW shirts in that mix? I would be up for a couple of new ones. 👍
Rumor has it, next run will be some OG shirts👍🏻👍🏻👍🏻👍🏻😁😁😁😁
I love going on adventures in our bus!!!
I am going to be in town tomorrow around 10 am. See u guys then😬😜🤪
👍🏻👍🏻👍🏻
I love going on adventures in our bus!!!
Made it home. Bus ran good but the new tranny is loud seems louder than the old one at 60 mph. Generator light came on half way home. So I stopped and checked a few things. Decided to say fuck it and drive it home with the generator light on.
-
AuthorPosts
- You must be logged in to reply to this topic.