Home › Forums › KCW Completed Projects › Tripple RGB

Viewing 0 posts
Viewing 15 posts - 16 through 30 (of 63 total)
Previous 1 2 3 4 5 Next
  • Author
    Posts
  • John Jones
    Moderator
    April 26, 2018 at 6:36 am
    Post count: 11587
    #11917

    I emailed Nate this morning to see what he can do….  😎

    Blow me!

    Vwsarent4hippies
    Participant
    April 26, 2018 at 11:09 am
    Post count: 126
    #11926
    Jb wrote:

    Damn! 10k? didn’t matt already write the file or however that shit works? Seems we need need to get a fellow VW junkie slash machinist to get excited about these??? at least for the prototype trial and error portion!!

     

    If an operator at my work ran a file from an outside source in a mill, they’d be fired faster than you can blink. Crashing a $250k machine doesn’t make friends

    BBWB
    Participant
    April 26, 2018 at 1:21 pm
    Post count: 1279
    #11928

    I have a friend here in Tucson that has a proto type shop. Full CNC mill and lathe. Let me know if you need his contact info.

    I'm at the age where "fuck off", "fuck you", and "fuck it" answer most questions.

    John Jones
    Moderator
    April 26, 2018 at 5:16 pm
    Post count: 11587
    #11934

    I bet Nate will want in on this deal… 😎

    Blow me!

    John Jones
    Moderator
    April 26, 2018 at 5:18 pm
    Post count: 11587
    #11935

    so we have put 165/45/15’s on a bus.. Thats TINY!!!!!  lets see how BIG we can get on a bus!!!  With tripple RGB’s and some trick front end work.. maybe we can get some thing like I have on the baja or bigger????

    Blow me!

    dirtylawnchair
    Participant
    April 27, 2018 at 9:01 am
    Post count: 62
    #11968
    John Jones wrote:

    With tripple RGB’s and some trick front end work..

    Would the triples level out an early bus with a bay ball joint front end installed?  or would you still need to install adjusters to get the nose up a few?

     

    Matt Faulkner
    Participant
    April 27, 2018 at 9:18 am
    Post count: 56
    #11970

    Nate’s got the files.  We’ll see what he says!

    https://www.youtube.com/watch?v=JOWJA-kl5HE

     

     

    Scott Sain
    Participant
    April 27, 2018 at 12:53 pm
    Post count: 394
    #11974
    Matt Faulkner wrote:

    Nate’s got the files. We’ll see what he says!

     

    How many horsepower is that in the video?

    VWs, food, music, and food
    VW Drag Night
    July 14-15, 2023
    www.vwdragnight.com
    Germanaire Drag Day and Social
    November 17-18, 2023
    www.germanaire.com

    John Jones
    Moderator
    June 29, 2018 at 7:59 am
    Post count: 11587
    #14346

    Nate’s working on these for me…. 😎

    Blow me!

    Vwfool
    Participant
    June 29, 2018 at 8:15 am
    Post count: 785
    #14350

    Sweet!  Can’t wait to see these.

    surflife25
    Participant
    July 19, 2018 at 7:22 am
    Post count: 5
    #15152

    That’s awesome!

    John Jones
    Moderator
    July 19, 2018 at 8:01 am
    Post count: 11587
    #15157

    I’m hoping for an update soon…. 😎

    Blow me!

    Glennmoss
    Moderator
    August 7, 2018 at 12:53 pm
    Post count: 301
    #15480

    Trying to come up with ideas for my Senior Design project next semester and I would be interested in incorporating this into our project. I’ll have free reign of the CNC machines at my university so I could fab one and help you guys develop it.

    John Jones
    Moderator
    August 7, 2018 at 2:49 pm
    Post count: 11587
    #15484

    Glen I already have Nate on it….  It’s been awhile now… I hope I haven’t wasted money and him time…. 😎

    Blow me!

    Wayner
    Participant
    September 17, 2018 at 9:41 am
    Post count: 190
    #17416

    Was talking to cole last weekend at the show and he reminded me about this….are there any new updates on this project.

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 63 total)
Previous 1 2 3 4 5 Next
  • You must be logged in to reply to this topic.