Home Forums KCW Completed Projects JJ’s Class 11 Oval

Viewing 0 posts
Viewing 15 posts - 1501 through 1515 (of 1775 total)
  • Author
    Posts
  • John Jones
    Moderator
    Post count: 13616

    I’m gonna have to horde 67 axles

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    8375C0A6-6853-4DC6-A644-89CE12134976BFAD6B7D-F4E9-42E3-A8AE-DA3788D05714

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    I’m gonna go back to stock backing plates to help keep some dirt and sand out of my brakes!!!!

    look at the top of the tower 🀫🀫🀫 Β  I’m thinking a peice of tube between the towers right through the body 🀫🀫🀫🀫

    6DB80901-1491-4E65-87F1-53EE469C3651DF0C2EF0-5ED4-423C-8272-919DC462A3FD4608477F-2468-4E2C-854E-E07233A5099E
    How about them slots!!!! Β  I’ve been fighting those for awhile.. Β that’s why my shocks are all dentedπŸ˜πŸ‘ŽπŸ»πŸ‘ŽπŸ»πŸ‘ŽπŸ»πŸ‘ŽπŸ»πŸ‘ŽπŸ»πŸ‘ŽπŸ»πŸ‘ŽπŸ»πŸ‘ŽπŸ» Β Duhhhhhhh , Β πŸ‘ŽπŸ»πŸ‘ŽπŸ»πŸ‘ŽπŸ»πŸ‘ŽπŸ» Β Trans needs to slide back about 1/2 plus…

     

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    My wife says this is my β€œRC” car πŸš™ now!🀫🀫🀫

    1st redo my trans mounts Again!!! Β  Fuck this will by like 4th time I’ve redone my mounts!!!
    2nd figure out a new β€œSlap plate” for the rear..🀫🀫🀫😎😎.

    Shocks are sent off to Rulo.!! Β I’ll have an extra set now!!! Β πŸ‘πŸ»πŸ‘πŸ»πŸ‘πŸ»πŸ˜

    Get a new trans built..  super diff..  stock case..  light weight!😎😎😎😎😎

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    Back in the dirty 😎😎😎😎😎😎😎😎😎

    2A429112-894A-4656-A5D6-C84DA4BB02CD

    Luck is when preparation and opportunity meet.πŸ‘Š

    Rustabus
    Participant
    Post count: 3319

    Looks Clean!!!πŸ‘

    Audrey Jones
    Moderator
    Post count: 1611

    Some photos a friend send from primm – how many people does it take to hold up an oval hood?! Obviously this Β was after we ditched the hood prop πŸ€ͺ😎😎😎 1F3C8628-868E-48DD-B1ED-13E0756206A60EE93DE6-BDAE-4C5E-8F17-D18EF9A1EB2FWe can’t stop thinking about Primm over here!!! How awesome is it to come home from a race and not be all grumpy and low on the racing rollercoaster?! And we came home with carnage too! I don’t think JJ posted the tranny drain plug that was metallic and chunky πŸ˜³πŸ˜³πŸ˜³πŸ™ˆπŸ™ˆπŸ™ˆΒ But it was tons of fun anyway 😁 πŸ€™πŸ»

    John Jones
    Moderator
    Post count: 13616

    That’s MY Family right there! Β You add Zack in there.. Β we can do anything!!! So Proud!!!!! Β So fucking proud! Β This coming from a guy who felt family held him back🀫🀫🀫🀫🀫. Β  I just didn’t know!!! Β  β€œNow U Know” 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    Back here gonna modify my trans mounts again!!!!🀫🀫🀫🀫🀫🀫🀫🀫🀫  my stops are set at 9 degrees down  and off the stops 22 degrees!!!  Wow!!!  Preloaded like a mofo!!!!!😎😎😎😎😎

    these are 22mm torsions. Β  Β I did some reading about bars… Β 22 is stock. Β But there were three different lengths.. which Β obviously affected spring rate. Β VW also made some 23’s… Β and I found a setπŸ‘πŸ»πŸ‘πŸ»πŸ‘πŸ»πŸ‘πŸ»πŸ‘πŸ»πŸ‘πŸ»πŸ‘πŸ»πŸ‘πŸ»C847B108-F7AB-47DF-9318-7B36701BB7515CB31B69-4C1C-402B-907B-27E0BD6CAD821B78A41D-D15D-4E66-8AF1-F7FD4B8C313FE0A7F6F0-84B2-4BEC-875B-6ABEDB8E0E4882125497-D59B-47C3-98F6-E873B52CA9D80B4429EA-855D-48A0-AB93-DB076F45C9B2
    im gonna fully mock it up again and get it straight!! Β And pull the trans and tubes back!! Β And avoiding my shock!!πŸ˜ŽπŸ˜ŽπŸ‘πŸ»

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    Cool chart I found at CB most guys are running long torsions. Β I’m running short!

    AF130AC7-14A7-4E23-9486-48072B64FF04

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    I thought I had found some 23’s.. Β but no. Β I really need something pretty stiff, Β I was told those big IRS cars are running 24’s β€˜ that’s long 24’s.. Β but I bet they have twice the rear travel I have…. So I need something stiffer to handle the same bumps with 1/2 the travel to absorb it.. Β I’m thinking 26 maybe?!! Β  Β Anyone have a loose set of 26’s ?

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    You can see where I am headed with thisπŸ‘πŸ»
    0F04427A-875B-4DC4-A7E7-9D774B8F1A6A27289A3A-2475-40FA-B250-D197C90EF3AD1ADA1F75-5A91-4018-A886-DB316768CD3A8D89DD98-94CC-49FA-8243-ECA8E03537E4

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    look at how far back out I need the move my transmission 🀫🀫🀫. That’s why the tubes where hitting my shocks! Β Fuck!!!!!!!😎😎😎😎

    7F071D46-C91F-4D05-969F-4BB72A0C3C4A

    Luck is when preparation and opportunity meet.πŸ‘Š

    John Jones
    Moderator
    Post count: 13616

    Start over

    E3397A4E-80A5-4D75-AE8C-9007397A49466E58151B-586F-4DDF-AA0E-81495E589353

    Luck is when preparation and opportunity meet.πŸ‘Š

    alykat
    Participant
    Post count: 1002

    At least you have time and tools to do the work. And you will have cured another issue. Pretty soon it will all be perfect !

Viewing 15 posts - 1501 through 1515 (of 1775 total)
  • You must be logged in to reply to this topic.