- DarioParticipantJune 27, 2020 at 8:12 amPost count: 532
Are all those intakes port matched?
Nope. They have never been bolted to a set of heads yet to be. Fresh out the package. What books have you been reading? Talking to Eric Madison?
CB Performance had some upgrade options that I paid for on the intakes. I can’t remember what it was called right now but it was a matching of some sort. If they’re all the same then cool but I’d hate to lose those upgrades.WillyModeratorJune 27, 2020 at 8:24 amPost count: 1149
Might want to consider doing a bay window gas tank because this thing is going to be thirsty! 😅DarioParticipantJune 27, 2020 at 8:46 amPost count: 532
Might want to consider doing a bay window gas tank because this thing is going to be thirsty! 😅
It’s gonna produce a lot of heat too so I want to stop more often, might as well be for fueling up 8-)…
plus there’s this fancy new thing called a gas can … I’ll put one on my roof for Jesse and I 😆FranzKeymasterJune 27, 2020 at 8:52 amPost count: 3639
Baywindow gas tanks suck. More fuel to dump on the ground when you park in the gutter.
Yes Dario, I know which intake manifolds are yours. Don’t worry.😉
I’m going to sandblast and alodine coat all these aluminum parts.John JonesKeymasterJune 27, 2020 at 10:10 amPost count: 6731
I’m excited about your motor build….👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻Pat KKeymasterJune 27, 2020 at 10:17 amPost count: 1427DarioParticipantJune 27, 2020 at 11:26 amPost count: 532
Baywindow gas tanks suck. More fuel to dump on the ground when you park in the gutter. Yes Dario, I know which intake manifolds are yours. Don’t worry.😉 I’m going to sandblast and alodine coat all these aluminum parts. </noscript>
Sun will be perfect for baking today… They’re gonna look badass!!!FranzKeymasterJune 29, 2020 at 8:23 amPost count: 3639
Just talked to Blaine, sounds like he has the bottom end of your engine assembled. 7.7 : 1 compression ratio with .135 deck height and 61cc heads.JbParticipantJune 30, 2020 at 12:37 pmPost count: 627
Rad Dario! I am a big supporter of the build it right the first time theory👍 You are gonna have one badass bus broFranzKeymasterAugust 4, 2020 at 11:10 pmPost count: 3639
Blaine Beecher built Dario the ultimate 2276cc bus engine around a DPR 82mm nitrated crank, 5.5 VW journal rods, and a new mag case w/shuffle pins from Rimco.
Full Hoover lifter/rocker mods and Engle 110 cam with 44 WebersRSP3ParticipantAugust 5, 2020 at 2:32 pmPost count: 145
Oh double damn Dario that’s Big boy shit right there! Well done!John JonesKeymasterAugust 6, 2020 at 11:52 amPost count: 6731
Dario is going to have such an awesome camper.. end to end, top to bottom all the way around awesome!!!! 😎 Happy for ya Dario,,, I think you will love your bus more than any vehicle you have ever owned…. 😎 😎 I can almost guarantee it… 😎DarioParticipantAugust 14, 2020 at 5:16 pmPost count: 532
Slowly coming together… got a sneak peek of the finned valve covers…😮🤪🤩FranzKeymasterAugust 15, 2020 at 12:04 amPost count: 3639
I’ll trade you a purple for a gold? 😉
DarioParticipantAugust 15, 2020 at 6:19 amPost count: 532
😮😳 that purple is is pretty sweet!!! I really like the way the gold finished. Started out a little orange looking but now 🤩🤩🤩!!!Matt FaulknerParticipantAugust 16, 2020 at 4:38 pmPost count: 51
Haha the orangey gold trial cover makes the forum! Yeah it took a couple tries to dial in that gold, but now it’s legit!
Everybody here loves the purple too Franz, you’ll be stylin either way!
- You must be logged in to reply to this topic.