Forum Replies Created

Viewing 15 posts - 1 through 15 (of 22 total)
  • Author
    Posts
  • ZachZ
    Participant
    Post count: 22

    Car runs. Some ride tuning and dialing in. Who else is ready for race season?  20220417_192223_compress28

    ZachZ
    Participant
    Post count: 22

    Very close to testing. 20211119_140959_compress91

    ZachZ
    Participant
    Post count: 22

    Amazing car being built. Its great when you get to go nuts and do whatever you want.

    ZachZ
    Participant
    Post count: 22
    ZachZ
    Participant
    Post count: 22
    in reply to: KCW randomness #61735

    You should build another drag car. That ghia was sick as fuck.

     

    As far as motor. I’d like to go turbo eventually. We all know through, is consistently thst wins events through.

    ZachZ
    Participant
    Post count: 22
    in reply to: KCW randomness #61733

    Yes,I agree John. The car is a pan car still. 10 degree pie cut up front. Beam narrowed 9 inches to suck in the spindle mounts.  Back was raised 3.5 inches and narrowed 3 inch on both sides. Tires are a 26x8x15. Stock rear fenders. The tucked look is the best. 20211119_140959_compress91

    ZachZ
    Participant
    Post count: 22
    in reply to: KCW randomness #61699

    Doing the same thing here! Pics soon. Mine is a street car though. But it looks similar!

    Sundays are great for building race cars. Adding fluids to start dialing in for 2022. 20211119_142947_compress26

    Nice Scott. The more out there the better.

    Hows about a motor pic of that rig?

    Engine, yes. Size, atleast a 2 liter. Heads, got 2. Cam, not stock. Compression, can’t run pump gas. Exhaust,  clean for now. 20211222_132434_compress16

    ZachZ
    Participant
    Post count: 22
    in reply to: KCW randomness #61663

    Right hand drive ,I see cool bug …vroom vroom

    Yeah. I knew when I started this I wanted it to be fun, different, just plan bad ass but still perform. Moved the seat back nearly 6 inches so peddles were going to be an issue from the start. Just kinda through one day screw it. RHD it became.

    ZachZ
    Participant
    Post count: 22
    in reply to: KCW randomness #61662

    Doing the same thing here! Pics soon. Mine is a street car though. But it looks similar!

    Sundays are great for building race cars. Adding fluids to start dialing in for 2022. 20211119_142947_compress26

    Nice Scott. The more out there the better.

    ZachZ
    Participant
    Post count: 22
    in reply to: KCW randomness #61657

    Few more pics from the build. John, glad you like it.  20211221_140918_compress6320211221_140909_compress82

    ZachZ
    Participant
    Post count: 22
    in reply to: KCW randomness #61605

    Sundays are great for building race cars. Adding fluids to start dialing in for 2022. 20211119_142947_compress26

    ZachZ
    Participant
    Post count: 22

    20200826_143128_compress11Car is getting close. This was just before the heater channels.  I just got finished with the heater channels. Its getting prepared for interior paint. Once painted, everything well start to be fitted for good. The motor has already been ran. So no issues there. Has a 8 inch narrowed beam with adjustable shocks, rear narrowed 3 inched raised 3.5 inches. Shrouded 30mm torsion bars. Jamar rear drag brakes with QA1 adjustable shocks. Limit straps. Ron Lummus vertigate shifter. Hydronic pedal assembly with clutch management. And converted to right hand drive. Seat position was moved back 3 inches for safety. Roll cage is fully tig welded chromoly tubing. Trans is a Rancho pro comp plus. Should be a nice car. Getting ready for 2022. I hope to make the junction race next year.

    ZachZ
    Participant
    Post count: 22
    in reply to: JJ's projects #55607

    714

    ZachZ
    Participant
    Post count: 22

    I bet beam that had 20 plus welds held up through.

    ZachZ
    Participant
    Post count: 22

    I through drag racing was hard on cars. Looks like fun through. Maybe if I get board of the strip I’ll try this out.

Viewing 15 posts - 1 through 15 (of 22 total)