Forum Replies Created

Viewing 15 posts - 1 through 15 (of 89 total)
  • Author
    Posts
  • Riley K
    Participant
    Post count: 89
    in reply to: KCW randomness #68179

    Hype 📈📈📈

    Riley K
    Participant
    Post count: 89
    in reply to: Parkway projects #66019

    Ripped out the old insulation and headliner on Friday. It was extremely dirty to say the least. Took a while to scrape all the bits that didn’t come out in big chunks. 2F3CF7ED-67A9-4FE2-AE0B-C7FFB2D70719DD293617-2F44-43A1-8FBF-8709C809B178
    Took the interior quarter panels out to find a surprise underneath. 0F0B0546-CF38-45DF-85ED-4DAA296D5BCB
    Then stuck Retro Sound in the cargo area behind the backseat and in the quarter panels.

    Riley K
    Participant
    Post count: 89

    Finished grinding welds on the nose today. Also ground all the welds on the cargo floor and front floor. 0C5B7627-9519-427D-91EE-6F34088EA267166C5263-DC6B-4CCD-BD0B-ABEAF6F248D0

    Riley K
    Participant
    Post count: 89

    Ground welds on the driver side rear corner earlier. 8E29D619-EDA9-4CF4-A5BB-2B5788195C68Began grinding welds on the nose as well.

    Riley K
    Participant
    Post count: 89

    Just finished grinding welds on the passenger side rear corner. B73FCCBF-7A50-4C84-AD5E-132420B7982A
    Onto the driver side!

    Riley K
    Participant
    Post count: 89

    I like the idea of keeping it all Turkis. As for wheels, the early fuchs look pretty good!

    Riley K
    Participant
    Post count: 89

    Looks Killer!!!

    Riley K
    Participant
    Post count: 89

    Got the driver side battery tray and mudflap fit earlier.1BEFAE13-0DC3-4C8B-8336-A5180CEFDE5009C10CC9-18CE-4C4D-8216-AC7E15445B2CThen moved on to grinding the welds on the driver side dogleg.5B77EE5B-51C7-4F65-A004-CF4123E72304Just finished grinding the welds on the passenger side.4E8E7D87-3405-4FE3-9C67-118265415A5F

    Riley K
    Participant
    Post count: 89

    Got the driver side Compartment Shelf fit and drilled as well.1CA39666-94F0-461F-8E54-77E2077B1825

    Riley K
    Participant
    Post count: 89

    Finished blasting the belly pans and cargo floors this morning.44929A47-D473-4CA6-A65F-54E0EA633666 Now working on fitting the passenger side battery tray and mudflap.0B02C594-7D06-4A0C-84F5-3BFAC7852E341C9B1EFB-53C8-4289-8E79-7AA0AEEDCEB6

    Riley K
    Participant
    Post count: 89

    Second verse same as the first. Finished fitting the passenger side floor, marked it, and drilled holes.2D361414-74A2-47BE-BA5A-37C8EABA56B61C1130F3-8C16-4B1C-AEA7-89041B324E64

    Riley K
    Participant
    Post count: 89

    Got the Driver Side Cargo Floor fit today. Started by trimming the edges to get it to actually slide in. Marked where the Top Hats were and spots to drill. 37F467EF-0044-4670-84DD-B4120B582233
    After drilling: 8FF035D9-8CA3-4697-BD1B-DDAC75F39B3890CDDF3E-ACAD-4628-968A-41BF7414B0DEStarted marking where to trim the passenger side cargo floor next.65C4B444-E683-4FA4-9857-18C34B8107BF

    Riley K
    Participant
    Post count: 89
    Riley K
    Participant
    Post count: 89
    Riley K
    Participant
    Post count: 89
Viewing 15 posts - 1 through 15 (of 89 total)