Forum Replies Created
-
AuthorPosts
-
in reply to: Parkway projects #55004
Working on a carpet kit install for a local Herbie this morning.
We will build it if it comes.
in reply to: Buddy’s 59 single #54979Finished buffing in the cab area… went over all of the door and dog leg edges, door jams, upper rear cab wall, everything overhead, headlight buckets, parcel tray lip, and the dash.
Sanded the roof down also. I’ll get that shined up tomorrow then start on assembly.
We will build it if it comes.
in reply to: Buddy’s 59 single #54958Painted safari frames and the touch up areas from nut plate and tab install this morning.
Parts have been arriving to get rig assembled.
We will build it if it comes.
in reply to: Buddy’s 59 single #54926Sorry to say Bubby, but you flapper is stuck. Would you like it working ?
We will build it if it comes.
in reply to: Buddy’s 59 single #54920what do you think? Looks a little funny now doesn’t it?
I agree. I’ll get’r buffed up.
We will build it if it comes.
in reply to: Buddy’s 59 single #54919Started today epoxy sealing safari frames. Paint tomorrow.
Worked my way around the cab, wet sanding with 3000 grit to take off the the massive amount of surface grime, in the visible areas.
Done sanding. Starting to work my way back around buffing.
We will build it if it comes.
in reply to: Dans ‘65 Tesla #54904Have you checked theses out Dan?
We will build it if it comes.
in reply to: Buddy’s 59 single #54893Ask and you shall receive…😁😂🤣😁
We will build it if it comes.
in reply to: Cole’s 65 Beetle #54892^^^👌👌👌👍👍👍
We will build it if it comes.
in reply to: Buddy’s 59 single #54890Fruits of today’s labor. Only a couple of spots I want to pick at on the outside.
Would you like the roof buffed out also Buddy?
We will build it if it comes.
in reply to: Buddy’s 59 single #54884Pretty darn happy with the pass side and back end. SHINY!!!
We will build it if it comes.
in reply to: JJ's projects #54874Few more bits then it’s break in time!!!
We will build it if it comes.
in reply to: Buddy’s 59 single #54873Yes…let’s get those bolted on there…
Not yet…wouldn’t want to get any buffing compound on them….😎😎
Working pass gate this morning.
We will build it if it comes.
in reply to: PatK’s Class 5/1600 #54872We will build it if it comes.
in reply to: PatK’s Class 5/1600 #54871Feel great about this weekends progress!!
Went from no cage to main cage bent, fit, and fully welded.
Lifted the body up to gain access for top side welds.
One more roof bar to bend/fit, and gussets then up with the body and last time to weld those.
We will build it if it comes.
-
AuthorPosts