PeteParticipantAugust 31, 2019 at 7:00 amPost count: 761
Vintage Speed makes them, sold as Dellorto spacers in their filter line. I think they do sell them separately from the filters.PeteParticipantAugust 31, 2019 at 7:51 amPost count: 761
Or maybe Andy could use a gasket as a template and cut some out of 1/8” aluminum on his CNC? Probably won’t save money but might get them quicker.John JonesKeymasterAugust 31, 2019 at 8:42 amPost count: 5589
This might be the most massaged badd ass motor Franz has done!!! Great Job dude!!! It looks awesome!!!!!
I am sooo glad it’s about done….. sooooooo glad…. 😎 😎FranzKeymasterAugust 31, 2019 at 4:35 pmPost count: 2791FranzKeymasterAugust 31, 2019 at 4:41 pmPost count: 2791
Thinking last night that the idle mixture adjustment screws are going to be almost impossible to access with these OEM recessed style. Looks like CB performance has the cool hex head ones. Tom you should probably order 4 of these 7285 before the engine goes into the car:
And get 4 of these velocity stacks 7223 while you’re at it. Thanks.
Fuel inlet to air filter issue.PeteParticipantAugust 31, 2019 at 6:01 pmPost count: 761
Not yet on the breather; probably Monday/Tues. I did install an 010 in place of the 019…seems to be a much better advance curve for the 36’er.
Yeah, mounting plates would work, or stack/glue some fiber gaskets. It’s not like you need a whole bunch of space. If you order from VS they typically mail quickly, just might take a week+ from Taiwan.
^Those idle mix screws are great. Super easy to dial in with a 8mm ratcheting wrench.unkParticipantAugust 31, 2019 at 6:43 pmPost count: 370
Thinking last night that the idle mixture adjustment screws are going to be almost impossible to access with these OEM recessed style. Looks like CB performance has the cool hex head ones. Tom you should probably order 4 of these 7285 before the engine goes into the car: https://www.cbperformance.com/product-p/7285.htm And get 4 of these velocity stacks 7223 while you’re at it. Thanks. https://www.cbperformance.com/product-p/7223.htm Fuel inlet to air filter issue.
franz. Just order them. Tell me what I owe and I will paypal John with the proper management fee added. I’m too drunk to order at the moment. Happy Labor Day.unkParticipantSeptember 1, 2019 at 9:02 amPost count: 370
Never mind. I ordered the parts u needed. Shipping direct to KCW.FranzKeymasterSeptember 3, 2019 at 7:57 pmPost count: 2791
Got the bearings for the throttle shaft, assembled carbs. and ran the engine today.
I also made a bad choice and wasted 4 hours drilling and welding 1″ tube through the empi sump. Just two tubes. For style points.
Good to go. No leaks + tuned.PeteParticipantSeptember 4, 2019 at 5:18 amPost count: 761
That’s a VERY nice engine. Killed it with all the details once again!John JonesKeymasterSeptember 9, 2019 at 5:09 pmPost count: 5589
He may have out done him self again!!!!!!!! Great finish Franz!!!! 😎 He spent today doing the last bits to this beauty today..FranzKeymasterSeptember 9, 2019 at 7:03 pmPost count: 2791
Yeah! Done done. Did all the dumb little stuff today. Changed some jets and ran some more. Crispy.
You must be logged in to reply to this topic.