NewboldParticipantJanuary 13, 2023 at 9:24 amPost count: 177
Sick! I’d like to see some dually wheels on the back 🙂RustabusParticipantJanuary 16, 2023 at 1:50 pmPost count: 3198
John’s RC was Awesome!!!!!! Tons of Fun!! And I don’t think he broke it!!!!😃😃👍😃👍😃👍John JonesModeratorJanuary 23, 2023 at 5:45 amPost count: 13320
I had a blast with my RC car!!! I’m gonna try and get back into racing after my surgery!! I think they race 1/8 scale in rifle!
my 1/5th scale is going to be 🔥 at the sand dunes!!
Proud and Stubborn 👍🏻John JonesModeratorFebruary 10, 2023 at 6:33 amPost count: 13320
Doesn’t look like there’s much organized racing in rifle…. Nothing has been updated on their Facebook since last year!👎🏻👎🏻👎🏻👎🏻 So you gotta drive to magma Utah or Denver 🧐🧐🧐🧐🧐🧐🧐🧐
I have always wanted my own track. I should just build one! More than likely if I build it, they will come.. just a track.. no shop. Let people buy it off Amazon!
humm. 90% of the time you could race outside in GJ
Proud and Stubborn 👍🏻John JonesModeratorFebruary 18, 2023 at 8:41 amPost count: 13320John JonesModeratorFebruary 20, 2023 at 7:07 amPost count: 13320
I spent too much of Saturday watching qualifying heats!!
I wish our class 11 was set up more like the RC is.. you get a few times to qualify…. And the qualifying is your best or average time.. whole races too!!! Not three laps and your done!!
Proud and Stubborn 👍🏻John JonesModeratorFebruary 23, 2023 at 6:27 amPost count: 13320
Been slowly looking the 1/5 scale over.. finding the next weak link…. The drive axles and cups… I was about to wear one straight the fuck out!
Proud and Stubborn 👍🏻John JonesModeratorMarch 5, 2023 at 10:32 amPost count: 13320
“Working “ on the 1/5 scale today. 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎.
Aluminum trans case. New 4Ever out drives, found some gritty bearings I replaced those. Gonna change the rear arms, new clutch, Getting the go over today!
Proud and Stubborn 👍🏻John JonesModeratorMarch 6, 2023 at 6:29 amPost count: 13320
Got it mostly done!! Everything in the drive line was worn! These outdrive pins were bent.. I was lucky to get them out! I had to drill em and use an extractor!
Proud and Stubborn 👍🏻John JonesModeratorMarch 7, 2023 at 6:23 amPost count: 13320
Ordered those pins and a few other bit’s.. 😎 😎 😎 😎 I really enjoyed my Sunday working on my RC rig.. I am soooooo tempted to clean up the lot and build me a track!!! a mini CRANDON!!!! 😎 😎 I need more racing in my life… That would be fun…. and be a great waste of time!!!! If I build it… I bet other people will see it and wanna play too… 😎
Proud and Stubborn 👍🏻BBWBParticipantMarch 7, 2023 at 8:06 amPost count: 1339John JonesModeratorMarch 8, 2023 at 7:03 amPost count: 13320
I bet other people will see it and wanna play too…
That’s what I’m saying. If you build it, they will come.
I think about it way too much! I just need to round up some muscles 💪 one long weekend and move some shit around! I think I could clear up about a 75’ x about 60’ area…. That’s enough😎😎😎👍🏻👍🏻👍🏻
look at this trick fucker…
Proud and Stubborn 👍🏻John JonesModeratorMarch 11, 2023 at 8:00 amPost count: 13320
I spent Friday after my wound clinic appointment dinkering with my RC car..,👍🏻👍🏻👍🏻👍🏻👍🏻 I like being able to work on what ever is on top of my list🤫🤫🤫
this baby is ready to RIP again! I didn’t even turn it on🤫🤫🤫. I feel good about it. But need somewhere to run it.. hummmm. If only I had some dirt I could clear off…🤫🤫🤫🤫🤫
Proud and Stubborn 👍🏻John JonesModeratorMarch 12, 2023 at 8:00 amPost count: 13320
In between helping Rag top Ron with seats and mirrors…. I fired this bad boy up!!! I had fun doing some laps.. Probably the longest run time I have had with this rig. And it didn’t break🤫🤫🤫🤫🤫🤫🤫🤫.
I want to fix this fence and straighten it out like it was once. Then I can have me a small one lap course without much work 😎😎😎😎😎😎😎😎😎💪😎😎😎😎.
need to find a new home for that bed slide in thingy Franz bought for the Brown Cloud race team,. 🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔
Proud and Stubborn 👍🏻
- You must be logged in to reply to this topic.