JdawgParticipantOctober 8, 2017 at 9:01 pmPost count: 458
There is no better place to get shit done than KCW. ??Pat KModeratorOctober 9, 2017 at 6:42 pmPost count: 2832John JonesModeratorOctober 10, 2017 at 9:17 amPost count: 10787
You miss that shit huh… 😉 😉 😉 I’ve done it soo long now…. it seems like another day on the ranch… 😉 But I’m not complaining… I do have a great job… with great benefits. and a lot of freedom….. Man.. that feels good to type… Freedom… Thats all anyone wants right? 😉 😉 😉 😉 😉
Well… I am on it like stink on the old pooper… 😉 😉 😉 Gonna get to cleaning things up… also plenty of pin hole small patch stuff I could do too…. Paul… What’s your old man’s name again?? Just so I know who’s truck I am really working on…
The harder I work, the better I feel, sorta 😎Paul SextonParticipantOctober 10, 2017 at 2:22 pmPost count: 88
Dad’s name is Bill Sexton. Sometimes “Wild Bill”, sometimes “Slick Willy”. The metal $$ posted today.VwfoolParticipantOctober 10, 2017 at 10:54 pmPost count: 758
Looks like a shit ton of work, at least it will have a new lease on life when it leaves KCWRustabusParticipantOctober 11, 2017 at 5:55 amPost count: 2791
Heh, nowadays this much rust is considered a “normal” Bus build!!!!!! 😛 😛 😛 😛 😛John JonesModeratorOctober 11, 2017 at 8:36 amPost count: 10787
I disected like a surgeon in biology class disecting frogs baby… yesterday! 😀 😀 😀 and I aint done…. and caint never did a thing… so I am gonna get to it yall… 😀 😀 😀
I hope Josh gets his metal before mine… because he is my bro.. But I hope my metal doesn’t take 3 weeks… 🙂 🙄 🙄 🙄
The harder I work, the better I feel, sorta 😎John JonesModeratorOctober 12, 2017 at 6:53 amPost count: 10787
shit is looking like it is ready for some fresh metal…. I think I will start up front today… The inner valance is not all that purty along the bottom… but thats where I drew the line… and I will patch and repair the inner valance.. If I cut it out. I have to do the whole front floor, and a headlight bucket support… which it doesn’t need…. anyway… Things are looking good and clean over here…. I’ gonna keep pushing the shell forward till there isn’t a single thing to do.. then I will move to the removables and get this dialed in… unless my metal shows before then…. 😀 😀 😀 😀
The harder I work, the better I feel, sorta 😎Paul SextonParticipantOctober 13, 2017 at 4:19 amPost count: 88
I disected like a surgeon in biology class disecting frogs baby… yesterday! and I aint done…. and caint never did a thing… so I am gonna get to it yall… I hope Josh gets his metal before mine… because he is my bro.. But I hope my metal doesn’t take 3 weeks…
Worked with plenty of surgeons who didn’t have this level of precision… outstanding work JJ.John JonesModeratorOctober 13, 2017 at 7:42 amPost count: 10787
Paul…. I got tracking numbers on your green metal yesterday… 5 big boxes on their way from columbia! Sorry Josh… 😳 😳 I buy and install more green metal than the most ambitious of funky green customers.. 😉 😉 😉 year after year, bus after bus, project after project..
The harder I work, the better I feel, sorta 😎JWDIIParticipantOctober 13, 2017 at 8:38 amPost count: 473
Getting closer to seeing this one come back together! Hooray!!!John JonesModeratorOctober 14, 2017 at 8:13 amPost count: 10787
spent yesterday saving the pass dog leg and floor;… I need to dust off the lower inner valance so I can repair that area. 😉
The harder I work, the better I feel, sorta 😎John JonesModeratorOctober 15, 2017 at 8:04 amPost count: 10787
After I blasted Toms’s vert I pushed your truck over and into the blast booth and dusted things off again… The main thing was the inner valance… I blasted the shit out of it.. I wanted to just expose every thin spot on there….. 😉 😉 but I went around the whole truck while I was at it… dusted off the treasure chest area better and the bed supports that were just surface rust.. these are places that never got painted from the factory. Before I put the bed floor on… I’ll epoxy in there and all those rails….
The harder I work, the better I feel, sorta 😎
- You must be logged in to reply to this topic.