Type2empireParticipantNovember 2, 2021 at 7:33 pmPost count: 41
John JonesModeratorNovember 3, 2021 at 7:57 amPost count: 10781FranzModeratorNovember 4, 2021 at 9:14 amPost count: 5280
- Getting excited to see her in person. Thank you team Kcw!
We got a all the seals and canvas to install the pop top. New tension springs too. Along with a bunch of suspension parts. New link pins, steering damper, sway bar clamps, and snubbers.
I masked and racked suspension parts for a black paint session.John JonesModeratorNovember 5, 2021 at 8:16 amPost count: 10781
Panama Red is going to camp again!!!! Run the roads of California and probably been seen on Shasta!!! 😎
The harder I work, the better I feel, sorta 😎RustabusParticipantNovember 5, 2021 at 8:51 amPost count: 2791
Awesome to see a Bus with crazy history about to come alive again!!!!👍👍👍FranzModeratorNovember 6, 2021 at 10:25 amPost count: 5280
Suspension parts painted. Everything except for the beam…Its waiting for adjusters to get welded in.John JonesModeratorNovember 6, 2021 at 12:16 pmPost count: 10781FranzModeratorNovember 6, 2021 at 3:23 pmPost count: 5280
YeahWill, I even welded the seams and bosses on the shock towers. I’ll probably weld in some center pin/tube gussets like the earlier beams have too.
Craig has a whole table full of fresh parts. Safari rubber too…I found some safari slider rivets on samba, so we should be good there.👍ColeBModeratorNovember 7, 2021 at 9:48 pmPost count: 2611John JonesModeratorNovember 8, 2021 at 7:33 amPost count: 10781
He’s something… 😎
“I don’t give a fuck” 😎 😎 😎
The harder I work, the better I feel, sorta 😎FranzModeratorNovember 8, 2021 at 10:32 amPost count: 5280
Assembled spindles. The bushings are perfect…not tight, not loose.
Installed new bearing races and machining drums now.John JonesModeratorNovember 11, 2021 at 8:21 amPost count: 10781
some adjusters would be nice.. 😎
Craig… You still out there? Been hustling?? Thursday Club Dues again!!!!! 😎 😎 😎
The harder I work, the better I feel, sorta 😎
- You must be logged in to reply to this topic.