- John JonesKeymasterDecember 12, 2018 at 12:13 pmPost count: 6941
😎 😎 😎 😎 Thats pretty much the idea.. 😎 Rarely do you have to wonder if we worked on your car.. 😎 I think customers like it that way… 😎 Keeps it honest too…. Your never gonna get a bill without some documentation, pictures mostly, yo back up the invoice… 😎John JonesKeymasterDecember 13, 2018 at 6:10 amPost count: 6941
Up and at it… Gonna try and get some billing work doe before I jump into my Thursday Paper work….. 8-( (Logs, Payroll, do my check book)…
I mostly spent yesterday prepping drivers side.. cutting things up higher… today I should add green metal….. That nose came out TI”S! 😎68tintopParticipantDecember 13, 2018 at 6:46 amPost count: 736
Damm John. Not wasting any time kickin ass🤪 KCW styleRustabusParticipantDecember 13, 2018 at 6:54 amPost count: 1978
Awesome!!!!!!!!! Add Green Metal!!!!!!!Pat KKeymasterDecember 14, 2018 at 4:20 amPost count: 1478
Pass side is moving along well. After lots of mock-up, measuring and a bit of pushing, the b,c, and d-pillars are in done and outer rockers along rear of cab are also done.
Bit more fitting on the cargo door rocker and it’s ready to burn in this morning. The funky green pile is shrinking.
JJ is kicking ass on the drivers side.
We will build it if it comes.John JonesKeymasterDecember 14, 2018 at 7:16 amPost count: 6941
Pat is kicking ass…. I’m just trying to not look like a slacker… 😎 😎
Everything is going great.. Progress is great, Shop is warm… we are motivated.. all is good!!! 😎 😎mdubgParticipantDecember 14, 2018 at 7:23 amPost count: 298
Un-frikin-believable! The speed and skill that you guys work at is truly amazing. The updates are great.John JonesKeymasterDecember 16, 2018 at 10:18 amPost count: 6941
couple randomn pics that were on the camera this morning.. 😎
Old… cause we are way past this point already!!!! 😎Pat KKeymasterDecember 17, 2018 at 7:16 amPost count: 1478
Few more pics from Friday.
FInished cargo door rocker and checked door fit. Everything came out titty-on-a-ritty!
One more little wonk to straighten in the c-pillar.
We will build it if it comes.mdubgParticipantDecember 17, 2018 at 8:14 amPost count: 298
Looks like some dumbass tried to jimmy the back door latch at some point in crew cab’s history. Of the 3 doors on that rig to break into, that would be most difficult. The other 2 would open if you go around a corner too fast 😎volksaddictParticipantDecember 17, 2018 at 8:50 amPost count: 640
I was thinking that was a scrape down the side that caught the jamb and the cargo door was later changed but you’re probably right.
Either way I’m looking forward to seeing how straight the jamb comes out cause when I fix a spot like that it’s never quite right. When KCW does that fix it is right.Pat KKeymasterDecember 18, 2018 at 6:01 amPost count: 1478
Got the pass. rear out rigger and jack point in yesterday. Also fit and tacked in pass. lower bed side section.
Bed side body line is a hammer over lip. Bit of a pain. Feel like I nailed it. Straight and tight!
We will build it if it comes.John JonesKeymasterDecember 18, 2018 at 12:06 pmPost count: 6941
more progress… Looks like I might have to join the party too…. 😎 I got my little project done… 😎
This piece never comes with C pillar on trucks.. but should… 😎
Pat doing what he does most and best.. Work… 😎 The guy couldn’t be more relaxed or happy than when he is at work… 😎BBWBParticipantDecember 18, 2018 at 3:26 pmPost count: 861
If I got as many “safety breaks” at work as I remember your crew takes, I’d be pretty happy and relaxed too! 🙂
I'm at the age where "fuck off", "fuck you", and "fuck it" answer most questions.C.HamburgParticipantDecember 18, 2018 at 4:36 pmPost count: 192
I was much more happier and relaxed working on VW’s all day and night.RustabusParticipantDecember 18, 2018 at 6:35 pmPost count: 1978
Have I mentioned how much I love the metal work!!!!! 🙂
- You must be logged in to reply to this topic.