- FranzKeymasterDecember 23, 2019 at 5:54 pmPost count: 3101
I’m going to keep working on this if we have the time.
Pat is working on the winch receiver. I changed the dash, moved and angled the Lowrance to the driver, which required moving wires and the mic button.DarioParticipantDecember 24, 2019 at 6:44 amPost count: 458
This new front skid plate 😳!!! Thing is tight as fuck!!!FranzKeymasterDecember 24, 2019 at 5:32 pmPost count: 3101
Added dash lights and winch wiring today.
DimmerColeBModeratorDecember 24, 2019 at 10:49 pmPost count: 1391
Will too just pull the winch wiring out of the car if needed? Or will you try to run them under the car somehow? Looking good!John JonesKeymasterDecember 25, 2019 at 3:03 pmPost count: 5910
Franz thinks of everything!!!! 😎 You guys decide when your coming out to get it??John JonesKeymasterDecember 26, 2019 at 9:12 amPost count: 5910
Winch mount today, more power and lights!!!! 😎 The boys are dialing this rig in!!! Whens the pick up?ColeBModeratorDecember 26, 2019 at 10:34 amPost count: 1391
I think kB is coming Friday I think. I won’t be out to grab this one unfortunately… but sounds like I’m going to need a pick up from the airport next month to pick up the sc 😎FranzKeymasterDecember 26, 2019 at 12:33 pmPost count: 3101
I thought that leaving the cable coiled behind the rear window would allow us to use the winch from the sides too. There is also a short lead from the battery in the front.Pat KKeymasterDecember 26, 2019 at 2:49 pmPost count: 1172
Winch mount welding finished, blasted, and sealed. Fits front, fits rear.
Stacked and wrapped two pallets of parts for the ride home.
We will build it if it comes.Pat KKeymasterDecember 27, 2019 at 4:50 pmPost count: 1172
We talked to Kevin today about doing some of the BOR series races. Sounds like were going to be heading to Vernal mid May.
BOR has not updated their wed page with their 2020 race schedule info. I was able to locate this on their Facebook.
We will build it if it comes.FranzKeymasterDecember 28, 2019 at 7:03 amPost count: 3101
Let’s do it!
I got an email from Baja Designs asking about our 2020 plans yesterday.FranzKeymasterDecember 28, 2019 at 7:24 amPost count: 3101
I’ve done some research on setting up the Lowrance. We can get a topo map with blm and Forrest service trail/roads from rugged routes for $100.
Its the google earth overlay that we really want….That has to be done with an editing program for maps that are not already available. (We do have an SD card with sat image for Baja. It’s in the lowrance already.)
But if we’re going to do these other races we’ll need some more maps….rugged routes says they can make sat image maps for any area.
I’m thinking about contacting them to get something going for the BOR race areas.
Also was thinking about the wiring on the lowance. It’s the antenna that is draining the battery. Because it’s powered full time. If you guys will trace the cable from the antenna on the hood to the fuse block on the passenger side and unplug it….The battery should stay charged.CorporateModeratorDecember 29, 2019 at 10:10 amPost count: 731JbParticipantDecember 30, 2019 at 9:34 amPost count: 562
Catch Franz takin a piss before the roosters run? 😂John JonesKeymasterDecember 31, 2019 at 8:38 amPost count: 5910
This baja is sooo rad…. I can’t wait to do some racing this year!!!!!!! Even if I am just pit support!!! 😎
That movie was pretty cool… I should do more of those.. 😎
- You must be logged in to reply to this topic.