- WillyModeratorFebruary 10, 2020 at 11:31 amPost count: 1212Juan 59 DDWTParticipantFebruary 10, 2020 at 4:10 pmPost count: 298
Good News Franz,.. rememeber, you
ll receive the driver dooor glass soon, Ill let you know,….about the inside Door handle chromes, I have a guy with a original set, but he`s confirming it, I hope to receive that confirmation this week. 👍FranzKeymasterFebruary 10, 2020 at 8:14 pmPost count: 3807
I started yesterday with changing the ignition switch. Then put a few decals on, battery cover and strap installed, painted hinge covers, windlace holders, and vent knobs.
Is the regulator decal correct? Where should these go?Juan 59 DDWTParticipantFebruary 11, 2020 at 11:17 amPost count: 298
Franz, here you see the place for regulator decal and about the year decal you can stick it right side of the windshield or the left quarter window,.. 👍👍FranzKeymasterFebruary 12, 2020 at 7:05 amPost count: 3807
The horn ring hardware and difference in 58 and 59 parts threw me for a loop…but I got it figured out.
The new divider trim looks great!DarioParticipantFebruary 12, 2020 at 9:53 amPost count: 547
So many details 🥳🤩🥰 looks fantastic!!!FranzKeymasterFebruary 12, 2020 at 12:26 pmPost count: 3807Juan 59 DDWTParticipantFebruary 12, 2020 at 1:38 pmPost count: 298
No problem Franz, Please do it. 👍FranzKeymasterFebruary 12, 2020 at 6:12 pmPost count: 3807
Got a bunch of little things done today…. On to installing the lowlightwerks mats! They look excellent.
Luis says to look at his samba thread for instructions….but there are like 50 pages of the same thing.
I just wanted to know if the tar insulation should be glued…or heated and stuck like original? Pete what did you do?
also. I see some screw holes where the firewall mat may have been attached that way. Thinking I will avoid putting holes in it unless the purist say it’s absolutely correct.PeteParticipantFebruary 13, 2020 at 6:43 amPost count: 916
Sorry, just seeing this; my mother passed away on Friday and funeral yesterday. Shitty week all around.
I have not installed my set yet; I’ve had the mats forever but only recently got the sound absorber mats from Luis. Here’s the process I plan to use. For the mats, see post from Braukuche on this page:
For installation of the mats themselves, see rtroy’s post on this page:
I can’t wait to get mine in. I ordered a second set of floor mats to keep mint so I could put my feet all over the other set with no worries.John JonesKeymasterFebruary 13, 2020 at 7:56 amPost count: 7114
Glad this is finally coming together just like Juan wanted it to.. Franz is the ultimate finisher!FranzKeymasterFebruary 13, 2020 at 8:09 amPost count: 3807
Thanks Pete. That’s what I thought. I was worried about the glue sticking to tar.
Sorry to heat about your Mom. My condolences.FranzKeymasterFebruary 13, 2020 at 8:14 amPost count: 3807
Installed the 3D printed vent knobs (thanks again Visser Precision), hinge covers with the tiny original screws. Windlace and Mat edging too.
Notice the screw hole in the defrost heat tube? I assume that is to hold the mat up?PeteParticipantFebruary 13, 2020 at 9:09 amPost count: 916
Thanks Franz. It sucks.
I think you’re correct on the screw holes. See post at top of this page:
On the bulkhead mat several folks commented that the backside needs to be cleaned of the production mold’s release agent before attempting to use a sealant to get it in place. I think wiping it down with acetone was the agreed upon method. Also the typical upholstery spray adhesives would not hold it. You’ll need something like the black 3M weatherstrip adhesive.Juan 59 DDWTParticipantFebruary 13, 2020 at 12:40 pmPost count: 298
Thank you very much for your help Pete,.. 👍👍
Many Good details Franz, realy Good Job,.. 👍👍FranzKeymasterFebruary 13, 2020 at 6:46 pmPost count: 3807
Insulation glued in. Upon closer inspection the thick side side is rubber and sticks very nicely with contact cement.
After Pete mentioned people having problems with the mats sticking I decided to run 36 grit sand paper over it. 👍
it fits nicely. I’ll glue tomorrow.
Juan 59 DDWTParticipantFebruary 13, 2020 at 10:45 pmPost count: 298
Wow, it’s going to look really nice,🤞… Perfect Job Franz 👍😎PeteParticipantFebruary 14, 2020 at 10:22 amPost count: 916
Looking good, Franz. Those floor mats have been unobtanium. The guy making them has indicated that once he runs out of materials he’s likely done attempting to produce them. Unless something changes Juan’s car will be one of only a hundred (if that many; likely less) that’ll have this correct detail in a restoration.
- You must be logged in to reply to this topic.