Audrey JonesModeratorJune 4, 2021 at 7:45 amPost count: 464
FUCK YEAH!!! #ShredTillYourDead
the 1131 car lives again 🙌🏻JeremyParticipantJune 4, 2021 at 12:44 pmPost count: 127
Looking good Jones’. When is the next race?FranzModeratorJune 4, 2021 at 8:41 pmPost count: 4191
Shocks are shimmed up with a progressive flutter stack on the compression and stiffer rebound all around.
You can see the flutter stack here with the large one against the piston and a couple small ones before another large one.
Dave-coParticipantJune 5, 2021 at 2:43 amPost count: 73
75 compression 90 rebound is what you want gppd luckAudrey JonesModeratorJune 7, 2021 at 4:49 pmPost count: 464
I saw Franz was doing some more shock adjusting this morning – it’s all coming together again!
JJ and Ben are working on the new UMP air cleaner this afternoon 👍🏻
We also took it to be weighed earlier!! 🙌🏻
#lightweightPat KModeratorJune 7, 2021 at 5:56 pmPost count: 2000
Franz is modifying the intake to fit under the deck lid.
We will build it if it comes.John JonesModeratorJune 8, 2021 at 7:52 amPost count: 7863
Well…. We kicked it’s ass… Ben cut up my carb box…. Franz welded it up for me.. I got my air cleaner in. at first I mounted it trying to make the 4″ tubing as short as possible.. but that is not how it works is supposed to be mounted.. so I flipped it over… I like it even better… intake is higher than any window opening… 😎 and I can still reach my battery and the burping feature is still correct. 😎 😎 I also cut out my seat tabs and moved them back.. which moved the seat back at least an inch… probably a touch more.. Took my cruiser pedal out… My damn Foot Drop makes it hard to transition from brake to gas and back.. 8-( I told Audrey… She may have to drive! Shit,. maybe Gretchen and Audrey drive this rig if my foot gets much worse..
Still need to get Nitrogen in my shocks, pipe it from the air cleaner to the carb box.. and do at least one axle boot thats leaking… 😎 I might put some headlights in and save the light bar for the sand rail… 😎 Keep the alll early looking rig… 😎 Oh… Some bumper ‘ets would look awesome. 😎WillyModeratorJune 8, 2021 at 9:17 amPost count: 1404
Wait… you’ve been one-foot driving a race car??? Keep that right foot planted JJ!
Punk kidPat KModeratorJune 9, 2021 at 2:25 pmPost count: 2000
AJ & Mila working on Class11 prep for the weekend.
We will build it if it comes.John JonesModeratorJune 9, 2021 at 2:28 pmPost count: 7863
I’m amped to get the car out again!!!! I’m gonna rally this girl!!! 😎Audrey JonesModeratorJune 10, 2021 at 8:04 amPost count: 464
YES! She’s ready for a real drive!! Great day doing a few things for the first time while working on our race car! #1131 baby!!
I removed our thiccc rear skid plate and replaced both axle boots + put bolted on some shocks JJ found laying around… got that skid plate muscled back up there and then JJ gave me some driving lessons 😜 note to self- this car has more camber than any other vehicle I’ve driven haha
after JJ also gave it a test drive he determined the steering box is very sloppy… dug one out of the pile to replace it with this morning 👍🏻
Looking good in that beautiful sunset!FranzModeratorJune 10, 2021 at 8:23 amPost count: 4191
What’s up with the fox shocks? They leaking or something?Pat KModeratorJune 10, 2021 at 10:06 amPost count: 2000
The rears wouldn’t extend after Newbold charged them.
We will build it if it comes.FranzModeratorJune 10, 2021 at 10:28 amPost count: 4191
Ahh, no bypass holes in the new pistons. They should move with some real force.NewboldParticipantJune 10, 2021 at 2:36 pmPost count: 104
Yeah a bypass hole sounds about right. I can hardly extend them with a ratchet strap winching them apart. I cant figure how to get the damn things disassembled so I best bring them back to you after I close up today. I can charge them up in the morning before I head out to hill climb.
- You must be logged in to reply to this topic.