Home › Forums › KCW Completed Projects › JJ’s Class 11 Oval
Gretchen JonesModeratorMay 2, 2023 at 8:08 amPost count: 1284
Up bright and early making progresss😁😁😁😁
I love going on adventures in our bus!!!John JonesModeratorMay 2, 2023 at 4:53 pmPost count: 12232
Got my trans scooted back.. I bet I moved it like 15mm’s or more🤫🤫🤫🤫🤫. Probably have to move the mid mount too…. Long studs in the trans with some nuts on the trans side???? 😎😎😎😎👍🏻👍🏻🤔. I put my trans in use my bolt in n shit for 3 years. Now I have it in the correct spot!!!👍🏻👍🏻👍🏻👍🏻🤫🤫🤫🔥😎😎😍😍😍🔥😍😘😘😁😁😋😋😋🤔😎😎😎🔥👍🏻🔥🔥John JonesModeratorMay 3, 2023 at 5:16 amPost count: 12232
This car…. 😎😎😎😎😎. Time sucker!! 🤫🤫🤫🤫🤫🤫🤫🤫
Love it though!
QUESTION…. I wonder?? If I torch the lower shock mounts and twist them enough to straighten out the shock bolt? Make the shocks bolts parrellel? Will it be weak?
So now, my rear suspension and engine are all set off spring plate length and zero toe in …. 🤫🤫🤫🤫🤫🤫🤫🤫🤫🤫🤫🤫🤫. Makes my car longer, makes my arc of rotation larger and adds travel!!! I’ve got it this time!!!!!alykatParticipantMay 3, 2023 at 5:29 amPost count: 917
Sounds like serious progress to me !John JonesModeratorMay 3, 2023 at 5:46 amPost count: 12232John JonesModeratorMay 4, 2023 at 7:07 amPost count: 12232
The KOH Rock that took out my he spindle….Audrey JonesModeratorMay 4, 2023 at 7:48 amPost count: 1284
That rock was BRUTAL 😅 KOH is no joke folks… Dave Cole who puts it on WANTS you to break out there.. that’s the whole point… carnage and only a few make it out alive!!!
I’m really enjoying the short course plan we have going 🤙🏻😎 let’s get her ready for CRANDON!!!!John JonesModeratorMay 4, 2023 at 8:08 amPost count: 12232
👍🏻 Hell yeah!
I dunno if moving the trans back is gonna be the fix all☹️☹️☹️😁. I fell like I need to drill through this axle tube and make the shock mount the same angle as the early fucking top😁😁😁😁😁😁😁
No Fucking room!
Look a how that spring plate is beating a groove in the stop🤫
Drill and reinforce!!!!👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻John JonesModeratorMay 4, 2023 at 8:09 amPost count: 12232
Thoughts? That’s full compressionPeteParticipantMay 4, 2023 at 12:39 pmPost count: 1128
Thoughts? That’s full compression
I’ll show my ignorance here….is it possible to remove the end casting from the axle tube a reinstall a few degrees turned, just enough for the shock to clear?VwfoolParticipantMay 4, 2023 at 5:44 pmPost count: 817
Do you have any split case trans laying around with axle tubes on it? I wonder if there is a difference in the split case tubes vs early 60’s onesJohn JonesModeratorMay 5, 2023 at 5:41 amPost count: 12232
Yeah I have some of the early end castings. Have some Porsche ends too.. but all that stuff is short axle.. I need to stay long axle…..😎😎😎
I think I am just gonna move the whole shock…. I measured it yesterday and I only have 5 inch’s of travel… I could put the shocks anywhere.. like right on top of the axle🧐🧐🧐🧐🧐🧐🧐VwfoolParticipantMay 5, 2023 at 7:11 amPost count: 817
Gotcha. Sounds like time to do some fabrication. Better get Rusty out there to help.John JonesModeratorMay 5, 2023 at 7:44 amPost count: 12232
Rusty who😘😘😘😘😘Audrey JonesModeratorMay 5, 2023 at 8:07 amPost count: 1284
- You must be logged in to reply to this topic.