- John JonesKeymasterJune 23, 2019 at 11:51 amPost count: 5910
Jesse and Dario are sorting out parts and rummaging through the trailer for good used shit… 😎RustabusParticipantJune 23, 2019 at 2:17 pmPost count: 1761
Uh Oh! Something might happen!!!!!! 🙂 🙂 🙂 🙂 🙂mtnbusParticipantJune 23, 2019 at 7:31 pmPost count: 914
every bus owners dream is to be on the lift at KCW !John JonesKeymasterJune 24, 2019 at 6:54 amPost count: 5910
Jesse made some progress yesterday!!!! Were gonna order him a few more parts this week… and next weekend should be good… 😎
It’s time jesse.. Lets push every chance we get and get this bus on the road!!!!!!!!!!!!!!! 😎FranzKeymasterJune 24, 2019 at 8:15 amPost count: 3092
Bring your engine down so we can start fitting tin.FranzKeymasterJune 24, 2019 at 12:21 pmPost count: 3092
Ordered your list of stuff from WW this morning. Contacted A1 about adding another header to our order, and your speedo will be ready tomorrow.FranzKeymasterJune 26, 2019 at 3:14 pmPost count: 3092Pat KKeymasterJune 27, 2019 at 12:22 pmPost count: 1172
Your WW parts arrived today.
We will build it if it comes.John JonesKeymasterJune 27, 2019 at 1:26 pmPost count: 5910
Bring a stack of benji’s, your storage fee is getting due also…. 😎 😎 Hey.. remember Mike is gonna be here Saturday to see his rig for the first time… You should be here! and roosters afterward! 😎68tintopParticipantJune 27, 2019 at 1:50 pmPost count: 683
Woo wee. Fuck ya. Let’s work on my shit all weekend. And get some shit done🤪😜I will bring the bengies and some party favorsWillyModeratorJune 27, 2019 at 3:46 pmPost count: 969
Yeah Jesse! Look at all this progress thats about to happen! BBB2020 baby!!John JonesKeymasterJune 28, 2019 at 6:23 amPost count: 5910
Woo wee. Fuck ya. Let’s work on my shit all weekend. And get some shit doneI will bring the bengies and some party favors
Sounds good… See ya soon!!!!! I’ll put off digging out a project for myself so I can help some too….. 😎 thats if I can keep my ass here… I been walking around saying SAND DUNES all week… 😎Pat KKeymasterJune 28, 2019 at 1:48 pmPost count: 1172
Your coming down tonight right! Not asking!
We will build it if it comes.John JonesKeymasterJuly 1, 2019 at 7:43 amPost count: 5910
Jesse was here… and handed me a short stack of 100’s…. He’s serious about getting this rig going…
I think I heard talk of Rhythms on the Rio first road trip?? 😎
Pat is all over brakes this morning…. Franz got his engine torn down for mods.. it’s more of a HP motor than a tractor motor… 😎
If the boys stay on your bus all week, I’ll need another stack by the weekend… 😎 😎
I guess we should try our best to get Doug involved with seats??? 😎 I have a perma bed stand in the trailer, and I think an extra mattress if it comes down to it!!!!!
Rhythms on the Rio is a good time!!!! a GREAT road trip.. and lots and lots of people just like us…. 😎John JonesKeymasterJuly 1, 2019 at 11:18 amPost count: 5910
Pats on front brake assy!!!!!! Assembly is happening!Pat KKeymasterJuly 1, 2019 at 4:20 pmPost count: 1172
Put is some time over the weekend and today on this.
Started with spindles, both needed new upper bushings, and king pins need a light touch on the lathe up as well.
Turned drums, cleaned and packed hubs and bearings, backing plates and parts all back in place today.
We’ll get soft front break lines ordered so I can put together the rest of the break system.
We will build it if it comes.FranzKeymasterJuly 1, 2019 at 5:21 pmPost count: 3092
Just figured out compression on your engine….It was 9.5 : 1 Way too much for a driver bus. I’m going to add about .070″ of cylinder shims to drop it down to 8 : 1
Also, I looked up your Norris cam. Here is some info. Sounds good for a bus. Similar to a 110 which is what Painters installs in the 1914cc “baby tractor”.
I am going to advance the cam 4 degrees to give it some low RPM grunt. Currently you have 0.RustabusParticipantJuly 1, 2019 at 5:36 pmPost count: 1761
Heh, Franz is Un-racing a motor!!! 😉 🙂
- You must be logged in to reply to this topic.