Home Forums Bullshit Je$$e’s (aka Tintop) Projects

Viewing 0 posts
Viewing 15 posts - 256 through 270 (of 2051 total)
  • Author
    Posts
  • 68tintop
    Participant
    Post count: 1060

    I am still thinking about buying that car for the motor. I don’t like scraping out Vw’s. It hurts my karma. Maybe I just pick up a motor from my buddy. I gotta focus on the rust repair fort get that done then I can start buying more parts. My bus is full of parts to be welded on and installed like windows for camper and doors. I got lots of work to do. I need to talk to John to see if we can make this his next personal project for me and I can help as much as I can so I can learn. I wanna restore Vw’s when I get older that’s we’re I wanna be in the dirtyshop ?

    mtnbus
    Participant
    Post count: 2479

    Don’t go growing up on us Jesse

    John Jones
    Moderator
    Post count: 13879

    I’m trying to get out of the dirty shop and Jesse wants in… 😉  😉  😉     Too much dirty shop work leads to a worn out joints and back… 🙄  🙄  🙄  🙄   a smart man figures out an easier way to make a living, and pays a dumb ass like me to do the work… 😀  😀  😀   But with that said…. there is a lot of satisfaction in doing your own shit… 😉  Not being dependent on anyone else to get what you want, you can do it your damned self… 🙂  🙂  🙂  🙂  🙂  🙂

    Been a wild ride, but it got me here 😎

    BBWB
    Participant
    Post count: 1372

    I learned my wrenching skills from watching and working with my dad. I learned rust repair from watching KCW over the years.

    I'm at the age where "fuck off", "fuck you", and "fuck it" answer most questions.

    Pete
    Participant
    Post count: 1141

    I’m trying to get out of the dirty shop and Jesse wants in… ? ? ? Too much dirty shop work leads to a worn out joints and back… ? ? ? ? a smart man figures out an easier way to make a living, and pays a dumb ass like me to do the work… ? ? ? But with that said…. there is a lot of satisfaction in doing your own shit… ? Not being dependent on anyone else to get what you want, you can do it your damned self… ? ? ? ? ? ?

    Balance, JJ, not either or.  You can do enough to keep your hands dirty, skills sharp, and teaches by doing, and you can also step back at times and let the help handle what’s in their wheelhouse and spare the physical toll.  Look no further than your clean shop for an example. 😉

    John Jones
    Moderator
    Post count: 13879

    I’ll buy that…. That I need more balance… I’m tipped over at the moment.. 🙄  🙄  🙄  🙄   But the more I work, the more positive things seems to stay…. 🙄  🙄  🙄  🙄  🙄  🙄     I dislike the need for money…. 👿   👿   I want to try and get as close to not needing it as possible.. 😉  😉  😉

    Been a wild ride, but it got me here 😎

    68tintop
    Participant
    Post count: 1060

    I can do it myself with some help on the hard shit. But with al this double door action going on between cole and the other DD getting brought back to life my panties are so wet. Might have to put on a new pair. It’s kinda hard to look at my bus just sitting in the back lot waiting for a new life. But it ain’t gonna happen on its own so I am going to buy a welder and start welding on something so I can perfect my skills. I weld structural shit a r work sometimes when there is no body to weld for us I booger it up. ?

    John Jones
    Moderator
    Post count: 13879

    Jesse….. You hit the top of the list….. 😀  😀   Peet is gonna get you dialed in….

     

    Been a wild ride, but it got me here 😎

    68tintop
    Participant
    Post count: 1060

    Fuck yea Pete. Thanks for fixing me up. I had a fuel leak from the hose to the tank somewhere can U run new hose all the way throughout. The oil leak from the fuel pump guide. Who goo BBB here we come baby???

    Franz
    Participant
    Post count: 5403

    Pat wants to see what brake fluid you have been using to top-off the reservoir.

    After closer inspection, your rear brake drums have eroded splines. Fronts are getting thin too. Probably should do all 4 drums new. The transaxle has a worn cross shaft causing the t/o bearing noise. We don’t have the right one in stock.

    ….so its at the point of ordering/waiting on parts again. About to get pushed back in the lot. 🙁

    John Jones
    Moderator
    Post count: 13879

    bummer… hope Jesse still makes BBB  😥  😥  😥  😥  😥

    Been a wild ride, but it got me here 😎

    68tintop
    Participant
    Post count: 1060
    1. Well shit. Order up the parts and we can just hope they come in a timely manner.
    68tintop
    Participant
    Post count: 1060

    The break fluid is in the center console custom made wood box. Cup holder majigger ?

    mtnbus
    Participant
    Post count: 2479

    I hope your bus makes it back on the road by BBB!!!!

    John Jones
    Moderator
    Post count: 13879

    damn I hope Jesse’s bus gets fixed…. If he can’t go.. there goes our adult size jinga game!!!!!!!! 🙄  😉  :mrgreen:  😈  😛  😯  So do we have to find some OG stuff for Jesse?  Or is there good new stuff available???????  I guess you could not go and stay back and work on your panel…  but that sounds like it would suck…. compared to an awesome road trip to warm ass ARIZONA! 😉

    Been a wild ride, but it got me here 😎

Viewing 15 posts - 256 through 270 (of 2051 total)
  • You must be logged in to reply to this topic.