- JbParticipantDecember 19, 2019 at 4:45 pmPost count: 562
Looks like that steering box took one hell of a hit!JasonSParticipantDecember 19, 2019 at 10:14 pmPost count: 110
Finished the beam with adjustersColeBModeratorDecember 19, 2019 at 10:19 pmPost count: 1391
This thing driving yet??
Keep crushing Jason and pat!JasonSParticipantDecember 19, 2019 at 10:45 pmPost count: 110
Rear frame horns removed and ready to do a transmission drop. Can’t wait to get this bus lifted!JasonSParticipantDecember 19, 2019 at 10:49 pmPost count: 110
Blew out bus again, it’s amazing how much dirt can get in the frame and continue to blow out. Decided to drill a few drain holes to prevent it from happening again.JasonSParticipantDecember 19, 2019 at 10:55 pmPost count: 110
Getting ready to add 3 compartments at the cargo door between the floor and belly pans. They will open inside the bus and house jumper cables and stuff that is in the way.WillyModeratorDecember 20, 2019 at 12:10 amPost count: 973
Looking awesome! You might run into some issues with those adjusters and your shift rod though…MikeKParticipantDecember 20, 2019 at 9:20 amPost count: 158
This is looking interesting. Great idea on the under floor storage. I had a Bus go through my hands years ago that had a similar setup with padlocks on all the doors. I have a feeling I know what the Bus was used for in it’s previous life.
What are the plans for the suspension? I might have missed it, but what did Franz do on his camper for the rear end?FranzKeymasterDecember 20, 2019 at 9:43 amPost count: 3099
Yeah I like the box idea too. That will be awesome!
The dropped frame horn cradle is probably a better more simple way to get lift, as my junk is all cut up and weird.
I’m running type 1 IRS on stock frame horns. My axle angle is max for 930 CVs at 24 degrees.Pat KKeymasterDecember 20, 2019 at 10:09 amPost count: 1172
Finished up cargo rocker yesterday.
Inner valance and lower a-pillar patches done.
Fit and burned in the drivers outer dogleg section to finish off yesterday. Inner section taken care of this morning.
We will build it if it comes.JasonSParticipantDecember 20, 2019 at 9:50 pmPost count: 110
Finished blasting the beam and painted with POR15.John JonesKeymasterDecember 21, 2019 at 11:08 amPost count: 5910
KILLING IT!!!!! 16-18 hours per day!!!!!!!!!!!!!!!!!!! Thats how you do it… 😎John JonesKeymasterDecember 22, 2019 at 11:52 amPost count: 5910
These guys are at it on SUNDAY!!! I know they were out here at 6am again!!!
There’s not another shop quite like KCW…. 😎JasonSParticipantDecember 22, 2019 at 10:01 pmPost count: 110
Finished cutting and bending the boxes for under the floor.mtnbusParticipantDecember 23, 2019 at 6:59 amPost count: 914
super cool !
Will there be hinges in the floor ? Is this the new age “smuggler” ?
Looks real good !
- You must be logged in to reply to this topic.