Jason's Projects

[ColeB]

#65132

Bus driving is the best driving

[JasonS]

#65137

John Jones wrote:

you won’t have any problems at sema… LOLOLOLOLOLOLOLOLOLOL…

This is so true! Several builds are lipstick on pigs, made to look good once and that’s it. I have seen pics and videos of sketchy details if you look closely at some builds.

I hope the SEMA girls are back this year

[Franz]

#65138

I’d cut the bumps stops and shock mounts off to start with. The weld a 1/8″ plate over the whole area. I’ll help you with it this summer. We can make it the sickest.

[JasonS]

#65144

Franz wrote:

I’d cut the bumps stops and shock mounts off to start with. The weld a 1/8″ plate over the whole area. I’ll help you with it this summer. We can make it the sickest.

Sweet, I was thinking the same thing. Want me to hold off fully wiring the rear harness?

I would like to do it on the rotisserie but ultimately I need to get it off of it ASAP. Otherwise It seems like it will never come off.

I plan on doing a roof rack/ladder and maybe the front winch mount also while I am out there. A lot to do in a few days.

[Franz]

#65146

Yeah leave the rear of the wire harness out if you don’t have it in.

We can do the shock mount work with the transaxle and suspension in place, no problem on the lift.👌and dabble a little paint too.

[JasonS]

#65151

Franz wrote:

Yeah leave the rear of the wire harness out if you don’t have it in. We can do the shock mount work with the transaxle and suspension in place, no problem on the lift.and dabble a little paint too.

Sweet!, new KCW product to sell? KCW off road shock reinforcements! Need a sick laser KCW logo.

[Pat K]

#65153

Oh man a Jason visit!!!  Hopefully we can get more then halfway through your list this time. Hahaha…😎

We will build it if it comes.

[Author]

Posts