- ColeBModeratorDecember 28, 2017 at 10:34 pmPost count: 1662
Here is Emilee’s bus I am helping her with. She picked it up from Moab the weekend after the campout. She brought it out here to get some motor help. Compression test shows 3 of the cylinders at 90 and the 3rd cylinder at 0…. hopefully new heads and piston kit etc show up tomorrow. Lots of red mud everywhere! Really clean bus, frame a bit smashed in one spot from a rock by the looks of it and one, less than dime sized rust hole in the floor at the drivers feet. Been sitting for at least 11 Years. Been fun so far cleaning it up! I just finished tearing the motor down a bit. Power wash tomorrow and then tear in even more.mtnbusParticipantDecember 28, 2017 at 11:31 pmPost count: 1163
this bus looks great ! stoked to watch the clean up process.
I think I checked this out at the campout ?
hows the interior ?
congrats Emilee!!!BBWBParticipantDecember 29, 2017 at 5:15 amPost count: 839
I was trying to make a deal on this bus too. Guess I didn’t have the right charms. 😎
Congratulations Emilee, that is a nice bus.
I'm at the age where "fuck off", "fuck you", and "fuck it" answer most questions.John JonesKeymasterDecember 29, 2017 at 10:21 amPost count: 6731
Crashin Cole’s Boss is in the house of KCW… 😉 😉 😉 😉 I wonder if she know’s the three commandments? 😉 The things that complicate a mans life… 😉 😉 😉 😉RustabusParticipantDecember 29, 2017 at 11:39 amPost count: 1969
Yup, Cole is in for it!!!! 😉 😉 😀John JonesKeymasterDecember 30, 2017 at 6:32 amPost count: 6731
Coles a lucky man for sure… 😉 😉 😉
He did good on the Vanagon project yesterday! They were hoping for some parts from CIP1 to show up… Heads… Waiting on some type 4 heads.ColeBModeratorDecember 30, 2017 at 6:51 amPost count: 1662
Emilee worked hard yesterday and got her motor and tin (so much tin on a type 4 motor holy shit!) all cleaned up. Then we tore that sucker all the way down! Her piston and cylinder kit and dual carbs showed up yesterday. Hopefully the heads show up today and we can put this motor back together. Looked inside the motor and everything looks pretty good. Camshaft lobes look all rounded and not much free play at all. But you can see in that photo Of the valves that the left intake valve, which was her third cylinder has sunk pretty bad. That’s what was causing the backfiring out the intake when we were trying to get it started when she got it. Since we are waiting for those heads we also went through her brakes and replaced an ebrake cable. Come on heads! Get here ????KleakeParticipantDecember 31, 2017 at 8:22 amPost count: 668
Cole is a lucky man! He has A nice bus , and girlfriend who is not afraid to get dirt under her fingernailsRustabusParticipantDecember 31, 2017 at 8:33 amPost count: 1969
Looks like mechanicals might not be a huge deal!! 😀 We need some more pics of the interior!! 😀 😀 😀 😀 😀ColeBModeratorDecember 31, 2017 at 7:43 pmPost count: 1662
Here are some photos of her interior and the cleaning process. The drivers side slider window had been smashed while it was sitting at the Ottingers. We replaced that with a jealouse window. We vacuumed everything out and I filled a little hole of rust under the drivers feet. She wants to re cover the seats and rear cushions. Derek Rutledge from Utah has been very kind and let her keep the bus at his house since he has a nice garage with tools and some heat. He also gave her a westy jump seat to fill some space where there is a cabinet missing. Thanks Derek! She wants to build another cabinet with storage and maybe a stove. She already made a new flip up table as well! I think she is going to make new curtains over the next couple weeks before we go back to KCW to finish her engine.
Her heads never showed up this week. Ended up being ok because she also needs new motor mounts and a clutch kit! It will all come in this week and then we can bust it out soon.John JonesKeymasterJanuary 8, 2018 at 6:35 amPost count: 6731
I heard Cole is ditching BBB to help Emilee next weekend…. I understand… 🙄 🙄 🙄 KCW Motel will be open… 😀 😀 😀 😀 Have fun, get lots done… Take something home with you… 😉 😉 😉 😉ColeBModeratorJanuary 8, 2018 at 9:06 amPost count: 1662
Thanks for understanding JJ. Thanks for all the help! Hopefully we get closer to having Emilee and I both ready to go camping! I’ve got a pretty good gig helping a pretty girl with her bus 😉 😉 I get to learn too! It’s a win win??ColeBModeratorJanuary 12, 2018 at 9:15 amPost count: 1662
Heading toward GJ now to work on this motor! See you guys in a couple hours!FranzKeymasterJanuary 13, 2018 at 8:44 amPost count: 3639
About to stack it up. Hydraulic lifter 2.0 typeIV…not sure I am qualified to work on something so new.BBWBParticipantJanuary 16, 2018 at 8:05 amPost count: 839
How did the engine build go?
I'm at the age where "fuck off", "fuck you", and "fuck it" answer most questions.John JonesKeymasterJanuary 16, 2018 at 8:51 amPost count: 6731
Cole your seriously slacking on the updates here… I saw a video of Emilee driving it down Kimball…ibbrown1ParticipantJanuary 16, 2018 at 7:39 pmPost count: 94
Cole dropped off the bus last night. Looking good as I got home from workJohn JonesKeymasterJanuary 17, 2018 at 6:09 amPost count: 6731
Cole Cole Cole…. No pics yet… I for see you and Emilee doing lots and lots of camping this summer… 😉 😉 Good for you guys!!!!!
Now…. Is it time to think about metal for the DD? Oh… I have your title…
- You must be logged in to reply to this topic.