John JonesModeratorSeptember 21, 2020 at 7:35 amPost count: 10418
I come in to Pat getting the 180 sticking done… 😎 😎 Awesome… Last 2K coming… 24 hour shop…. 😎
The harder I work, the better I feel, sorta 😎Lone StarParticipantSeptember 21, 2020 at 5:17 pmPost count: 250
Paint will be flying soon.Pat KModeratorSeptember 22, 2020 at 10:56 amPost count: 2745
Finished sticking panels, sanded fender wells, masked everything up and laid down the final coats of 2K primer last night.
Paint will be flying soon.
Body working removables is up next. We’re going to get everything in final prime and wait for all the elec. conversion parts to arrive before we paint in case we to make any mods.
We will build it if it comes.John JonesModeratorSeptember 23, 2020 at 8:55 amPost count: 10418
Shell looks awesome…. Fenders are up next…. Pat re dusted them off and got em on stand’s.. 😎
The harder I work, the better I feel, sorta 😎FranzModeratorSeptember 25, 2020 at 8:33 amPost count: 5108
Body in final prime. Going to let this sit while we figure out the Tesla drive unit and batteries…in case we need to do mods before paint.Pat KModeratorSeptember 25, 2020 at 10:23 amPost count: 2745
Started body working fenders Wednesday night, finished them up last night.
Just finished spray poly prime session on all four.
We will build it if it comes.Pat KModeratorSeptember 28, 2020 at 9:05 amPost count: 2745
180 sticked all fenders and laid down 2K primer last night. Only doors, hood and deck lid left to go.
We will build it if it comes.John JonesModeratorSeptember 29, 2020 at 9:09 amPost count: 10418
Shits looking awesome in the dirty shop!!!!!! 😎
The harder I work, the better I feel, sorta 😎AndymParticipantSeptember 29, 2020 at 12:50 pmPost count: 979
Guess I could have answered my own question in JJ post about his back. He’s working some!! Hell yeah!
Looks great pat!Pat KModeratorSeptember 30, 2020 at 10:41 amPost count: 2745
Started working doors Sunday night. As with the rest of the car the pass side required the most attention. Some shrinking and pin work, some hammer and dolly also.
Started mud work and had both doors blocked out in 36grit by daylight.
Back at it last night. Couple more rounds of spreading and blocking mud, followed by a poly primer session.
Started working the deck lid while mud was drying on the doors. Managed to get in roughed out also.
We will build it if it comes.John JonesModeratorSeptember 30, 2020 at 12:45 pmPost count: 10418
Pats rolling right through this body work… I heard Franz talked to EV West yesterday!!! WOOHOOO!!! 😎 😎
The harder I work, the better I feel, sorta 😎Pat KModeratorOctober 2, 2020 at 11:18 amPost count: 2745
Finished body working the deck lid Wed night and got started on the hood. Finished the hood up last night and got them both in poly primer.
Also 180 stick sanded both doors and coated them in 2K primer.
We will build it if it comes.RustabusParticipantOctober 2, 2020 at 10:54 pmPost count: 2709
Heh! Pat is like a 1600 Single port motor, runs forever, always gets it done, reliable, not flashy, no maintenance…….👍👍😀FranzModeratorOctober 28, 2020 at 8:48 amPost count: 5108
Some EV West pictures. I like the shifter modified for a drive selector.John JonesModeratorNovember 3, 2020 at 2:40 pmPost count: 10418
Dans car waiting on some progress… We need some Tesla parts I think… 😎 Good news…. We sent $20K over there about a week ago…. That should help generate interest in our project!!!!!! 😎 😎 😎
The harder I work, the better I feel, sorta 😎
- You must be logged in to reply to this topic.