Mrs. MuhrParticipantOctober 24, 2018 at 9:31 amPost count: 28
This was at Powderhorn. Unfortunately we didn’t get to ride much since “someone” decided to break their foot…RustabusParticipantOctober 26, 2018 at 9:58 pmPost count: 1506
Can’t start my bike!!!!! 🙁 Seems like fuel, I have it to the carb bowl, needle valve and jet seem to be working but gas isn’t going from the carb to the cylinder???? Awesome!! More YouTube videos!! 😉 😉 🙂John JonesKeymasterOctober 27, 2018 at 6:51 amPost count: 5263
well that sucks.. Mine are easy to start… I’m sure you tried everything already.. hummmmmmm 8-(FranzKeymasterOctober 27, 2018 at 10:19 amPost count: 2650
Clean the carb. Probably some junk in it….I assume these are a slide carb like a mikuni? You could raise the clip on the needle to adjust fuel kind of like changing jets.RustabusParticipantOctober 27, 2018 at 5:38 pmPost count: 1506
Yeah, pulled apart the carb a few times seems functional?? Moved that pin up as well and still no bueno!!!!! Shot in carb start and still no good, checked my wires…… guess I can check for spark but trying to start it I never got fuel to the cylinder/plug. I bet Ten Bajillion dollars you guys would have it running in 20 minutes!!!!! 😀😀😀Pat KKeymasterOctober 28, 2018 at 7:10 amPost count: 992
Your probably better off Rusty.
I’ve banged my self up good, 2 times, playing around on JJs gas bike. Twisted my knee up a couple weeks ago, hamburgered my elbow on Friday this week.
Maybe it’s just me. JJ and Corporate seem to manage not hurting themselves.
We will build it if it comes.John JonesKeymasterOctober 28, 2018 at 10:39 amPost count: 5263
These are not trick bikes…..8-) And Pat likes to ride BMX style… 😎 I hope we can keep it on two wheels… 😎
I put my “Hot motor” on last night… the damn creigs list Huffy is still the fastest!!!
Pics laterJohn JonesKeymasterOctober 30, 2018 at 8:32 amPost count: 5263
Yo Rusty???? You figure your shit out yet?? Bad ignition coil? We’ve got ours pretty dialed in over here… Franz was doing brodies all over the place on both of yesterday…. 😎 Now if we can keep from breaking them before I get to take em somewhere….. 😎 There gonna have to be tough to last around here!!!!
I ordered a different engine kit to combine with my other BBR motor that was pulling the head stud…. I’m just gonna use the bottom end, in a ported case and ported cylinder and ported piston I think…. anyway… I’m hoping it’s fast as shit!!! Then I’m gonna put it on a bike that has some performance to it… 😎 Or just have an extra engine…. 😎RustabusParticipantOctober 30, 2018 at 12:44 pmPost count: 1506
Naw, Haven’t messed with it in a few days! I bet you it’s something really easy that I’m missing! I’ll check the magneto and the CID unit eventually and see if that’s the problem 🙂 I did pick up Pat’s bike last night, it’s kind if compact I think it might be a 24 inch frame smilePat KKeymasterNovember 6, 2018 at 8:09 amPost count: 992
^^ Thanks for grabbing that Rusty. U heading through GJ this weekend while camping?
We will build it if it comes.RustabusParticipantNovember 6, 2018 at 6:25 pmPost count: 1506
All Good!! Heh, last time I heard I’m going Southeast now!!! Might have a Baja at the shop soon though, could load the Murray on top!!! 🙂RustabusParticipantNovember 7, 2018 at 9:18 pmPost count: 1506
Super Annoying that I can only get 90% finished on my shit!!!!
You must be logged in to reply to this topic.