volksaddictParticipantNovember 9, 2018 at 6:10 amPost count: 232
I purged this place of fiberglass completely last year when I dumped the 67. Still have my baja, but it’s all metal now.John JonesKeymasterNovember 9, 2018 at 8:15 amPost count: 3491
You building a “Monster bug”? How about a class 11 style trail blazer!!!!!!!!!!!!! with a body lift!!!!RustabusParticipantNovember 9, 2018 at 2:04 pmPost count: 882
Should be there in a couple hours!!!! 🙂 🙂 🙂 🙂 🙂John JonesKeymasterNovember 10, 2018 at 9:03 amPost count: 3491
You are one trusting man to think those two little roof rack clamps were gonna hold those two tall ass bikes on that car for a trip through the windiest road in america!!!!!! duhhhhh I think maybe you lean on your AAA insurance tow truck driver a bit more than he may have bargained for.. But it’s ok… Everything is here and safe…. 😎RustabusParticipantNovember 10, 2018 at 10:26 amPost count: 882
Cmon Jones! That setup was rock solid!!! And looked AWESOME!!!!!!! 🙂 🙂 🙂 Glad things weren’t as bad as my imagination had led me to believe last night!!!!!!! Now I get to look forward to a functioning Baja and Bike!!!! WoooHoooo!! see ya next weekend!!!! 🙂VwfoolParticipantNovember 18, 2018 at 8:53 pmPost count: 173
So who else is interested in the Franz sanctioned off-road trip next fall? I made a deal to buy the kid next doors ’73 standard bug for $300. Pan is wasted on the passenger side but otherwise the car is complete and not too beat up. I see it becoming a class 11 style toy. I can’t wait to drive all these forest roads out here and hopefully come to KCW for the weekend trip in the fall.
I acquired a wheel less ’69 pan from a bulk purchase of VW parts a while back. I think I am going to build this pan for the ’73 as I don’t have the bug at my place yet. This is me moving a pan when the front end is rusted solid and nothing moves, but the rear wheels turn, go figure.
So who else is in? Andy? Ben?AndymParticipantNovember 18, 2018 at 9:39 pmPost count: 593
Yes I’m in.. looking on Craigslist daily for a car to build. I want an irs/ball joint car.
I’m going to make a 6” wider beam to match the 3×3 arms I already have. Use those 3” lifted spindles/disc kit, maybe a body lift, and a subi swap 100%…
only problem I see with the car I’m planning to build is none of it is stock shit so if I needed to replace anything…I’d be screwed.
Do somethingFranzKeymasterNovember 19, 2018 at 9:04 amPost count: 1650
Andy is getting crazy. With a widened beam you are definitely going to need to brace the shock towers so that you don’t bend/break the beam.
You must be logged in to reply to this topic.