JdawgParticipantDecember 7, 2017 at 5:47 pmPost count: 360
It looks super proud out in the sun…like it feels like a million bucks and its only going to get better!Paul SextonParticipantDecember 10, 2017 at 7:38 pmPost count: 87
Got’s to get this back up on the front page! Clean Shop!?! Hellz yeah!!!John JonesKeymasterDecember 12, 2017 at 2:59 pmPost count: 2232
Back to the dirty…. I need to get on those parts… they are not doing themselves.. 😳 😳John JonesKeymasterDecember 26, 2017 at 8:07 amPost count: 2232
Good morning Paul!!! Hope everything in Texas is awesome…. I am about to start on removables… 🙄 🙄 😉 😉 Gotta get this rig back inside my head an don my schedule and figured out and done… 😉 Pics later…. 😉 Just want you to know, you are back tot he tip top of my list… 😉 JJ needs to earn some money this week….. 😳 😳 😳 😳John JonesKeymasterDecember 26, 2017 at 10:40 amPost count: 2232
Paul…. I am checking on that treasure chest door and a set of gates from Gerson… I was being a bit optimistic about repairing yours.. Not that it can’t be done…. but parts vs time… end result… I dunno.. So if they are available, I am ordering them….
Getting going on front doors now.. THEY are repairable… 😉 😀 😀 😀 …. Decklid looks ok so far also… and maybe the apron.. 🙄Paul SextonParticipantDecember 26, 2017 at 6:09 pmPost count: 87
Yep, things are rolling here in the Tejas, thanks. Green gates and TC door… sounds muy bueno! Trust you and your’s had an enjoyable holiday. New webpage pic is awesome! Thanks for the update.John JonesKeymasterDecember 27, 2017 at 7:54 amPost count: 2232
Worked on front doors yesterday… I think I will have them hanging and fit today! 😉John JonesKeymasterDecember 27, 2017 at 5:26 pmPost count: 2232
Doors repaired and on… not aligned just yet, they need some lovin…. But looking good… I should be able to smack those door around and tighten them up…. Do a few repair to the roof, rain gutter and start doing some body work…. 😀68tintopParticipantDecember 27, 2017 at 5:41 pmPost count: 314
Killer John looking good damm u make it look so fresh and clean. ⚒John JonesKeymasterDecember 28, 2017 at 6:18 amPost count: 2232
gonna get right after it today… I wanna work on the roof, small amount of welding up there… and aligning the doors.. Then I am gonna start slinging some mud… 😉 😉 😉 😉 😉PeteParticipantDecember 28, 2017 at 6:47 amPost count: 245
Looks great sitting there in bare metal. As honest as you can get with a build…nothing hidden there. Paul’s got to be stoked. Nice work as usual.John JonesKeymasterDecember 28, 2017 at 3:23 pmPost count: 2232
put a few pins up here… it had it’s share of dings.
If you don’t have some of these baskets…. I suggest you get some!!!! I honestly use these more than the slide hammer. 😉Paul SextonParticipantDecember 29, 2017 at 4:47 amPost count: 87
Interesting little tool. I’d imagine it allows for much more finesse than the old slide hammer. Outstanding work on the truck! Thank you for the updates.volksaddictParticipantDecember 29, 2017 at 6:22 amPost count: 106
💡 ! Need one of those.
I bet my doors won’t fit that well after I’ve “aligned” them 😳 I’m always fighting that last little binding on the top hinge, the one that causes the cracking.John JonesKeymasterDecember 29, 2017 at 10:20 amPost count: 2232
Funny you mention door fits jeff… I would say my first 10 years of business… I was getting lucky with door fits. It took me a long time to really figure them out…. But waaaay tired of fittin em…. 🙄 🙄 🙄 I;m ready for a new carrer… Any suggestions? 🙂 Changing dog legs really affects door fits also…. and a lot of busses need dog legs.. 😀
I got the roof worked and ready to prime, sanded back of cab and bulkhead and a pillars and working the nose now… I laid down a row of pins in my weld and pulled it out slightly, it was slightly low from shrinking.. bueno now!!!! Found a few tiny pin holes to weld and grind and bam!!! … just did my first spread.. 😉 😉 😉 😉 Change carrer’s… I can’t even spell it right…. … 😈 😈 😈
You must be logged in to reply to this topic.