JWDIIParticipantOctober 12, 2017 at 9:21 amPost count: 185
That rack would be perfect for viewing a race from the infield of a dirt track or side of a drag strip also! It is always cleaner sitting in the infield of a dirt track ! Well, clean as you can stay at a dirt track!
The wood flooring recycled out of an dry box 45-53′ trailer is nice also. It looks like butcher block and will have predrilled screw holes about every foot. It is a pain to save it out of the trailer but it looks great after it is refinished or left patina.KleakeParticipantOctober 12, 2017 at 9:42 amPost count: 396
If you rip 3/8 or 1/2 in strips from the lumber ,that gives you a 1 1/2 in. Wide strip . Thst should be plenty thick with the 8in center on the bars .cut a 1/4 in off the outside first snd use that as your spacing between the strips . I would pre dril and counter sink .John JonesKeymasterOctober 12, 2017 at 9:56 amPost count: 2437
Leake… are you saying buy plywood and cut strips out of it? do they make “good” plywood?68tintopParticipantOctober 12, 2017 at 10:25 amPost count: 348
I am not to sure about plywood but if u treated it maybe. The water gets into the edges of laminated materials. U want sold shit. I am workin on some epay wood for decks. But it is heavy as shitt.KleakeParticipantOctober 12, 2017 at 10:51 amPost count: 396
Leake… are you saying buy plywood and cut strips out of it? do they make “good” plywood?
NO plywood, redwood or Douglas fir 2×6 2×12 lumber the length that you need ,long enough so you can cut it full length strips . rip it on a table saw.68tintopParticipantOctober 13, 2017 at 7:21 amPost count: 348
I was thinking about wood for your bus. I can go by the wood shop my buddy works at and see if they have something that is like 5/8 to 3/4 thick in a outside material unless u found something. I was going to come down on Saturday if u need a handbuilding the rack deckJohn JonesKeymasterOctober 13, 2017 at 7:39 amPost count: 2437
Scott Hodges owes me a favor… He’s gonna cut me some redwood strips.. deck is 4’x12′ total… So I guess it’s handled now.. 😉KleakeParticipantOctober 13, 2017 at 8:14 amPost count: 396
Good morning everyone 😁😁😁 have a fabulous day.JWDIIParticipantOctober 13, 2017 at 8:21 amPost count: 185
Dang, It is great to see all the activity on the forum today. Everyone have a great Friday the 13th and get out there this weekend. I will be at the farm Sunday to watch Mr. Sain live fast and enjoy the show. 🙂mtnbusParticipantOctober 13, 2017 at 10:55 amPost count: 258
^^^ Hahahaha, Friday the 13th. A good day to blow a motor ! Lucky for me it was my Vanagon motor. shhhhhh….
Im back to driving the tank..John JonesKeymasterOctober 14, 2017 at 8:27 amPost count: 2437
Bummer Bubba!!!!! I think Paul in Delta blew his vanagon motor recently also.. head gasket? 😉 He’s been at Bob’s rebuilding it on the weekends..
Everyone get out and do something today… 😉 Make it a great day! 😉ibbrown1ParticipantOctober 14, 2017 at 1:08 pmPost count: 94
Is Paul coming to Moab? I haven’t seen him in years.PeteParticipantOctober 14, 2017 at 1:20 pmPost count: 299JdawgParticipantOctober 14, 2017 at 3:17 pmPost count: 378
So I was up at 4:30 today and decided the OLDMANN needed some more attention…this time it was something I’m ok at….detailing a car. So I detailed and buffed it and boy does the 30+ year old shitty paint shine now! 😎😎
When I was done I figured I might as well put a few miles on it so I drove around a bit and took a few pics. 👍👍
This is the happiest I’ve been with this old car…KCW is the fuckin shit!
You must be logged in to reply to this topic.